. .. Mesure-de-la-résistance-Électrique, , p.81

, Exploitation des mesures de résistance électrique, p.83

. .. Résultats-expérimentaux,

. .. Conclusion,

.. .. Conclusion,

. Bibliographie,

S. ?ahin and M. Übeyli, A Review on the Potential Use of Austenitic Stainless Steels in Nuclear Fusion Reactors, Journal of Fusion Energy, vol.27, issue.4, pp.271-277, 2008.

M. S. Andrade, O. A. Gomes, J. M. Vilela, A. T. Serrano, and J. M. De-moraes, Formability evaluation of two austenitic stainless steels, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.26, issue.1, pp.47-50, 2004.

T. Angel, Formation of martensite in austenitic stainless steels-effects of deformation, temperature, and composition, Journal of the iron and steel institute, vol.177, issue.1, p.165, 1954.

M. Arcan, Z. Hashin, and A. Voloshin, A method to produce uniform plane-stress states with applications to fiber-reinforced materials, Experimental mechanics, vol.18, issue.4, pp.141-146, 1978.

F. Michael, D. R. Ashby, and . Jones, Matériaux -T1 Propriétés, applications et conception. Dunod, 4e édition edition, 2013.

F. Michael, D. R. Ashby, and . Jones, Matériaux -T.2 Microstructures, mise en oeuvre et conception. Dunod, 2014.

P. Atanda, A. Fatudimu, and O. Oluwole, Sensitisation study of normalized 316l stainless steel, Journal of Minerals & Materials Characterization & Engineering, vol.9, issue.1, pp.13-23, 2010.

C. Auguet, A. Isalgué, F. C. Lovey, F. Martorell, and V. Torra, Metastable effects on martensitic transformation in SMA, Journal of thermal analysis and calorimetry, vol.88, issue.2, pp.537-548, 2007.

M. Baeva, S. Neov, and R. Sonntag, Appearance of BCC martensite after cold deformation of austenitic FeCrMnN steels, Scripta Metallurgica et Materialia, vol.32, issue.7, pp.1031-1035, 1995.

?. Balo, M. Ceylan, and M. Aksoy, Effects of deformation on the microstructure of a Cu-Al-Be shape memory alloy, Materials Science and Engineering : A, vol.311, issue.1-2, pp.151-156, 2001.

H. Bargui, H. Sidhom, and Z. Tourki, Martensite induite : Incidence sur le comportement en écrouissage et sur la limite de formage de l'acier inoxydable austénitique AISI 304, Matériaux et techniques, vol.88, pp.31-41, 2000.

A. Basuki and E. Aernoudt, Effect of deformation in the intercritical area on the grain refinement of retained austenite of 0.4c trip steel, Scripta Materialia, vol.40, issue.9, pp.1003-1008, 1999.

M. Bayerlein, H. Mughrabi, M. Kesten, and B. Meier, Improvement of the strength of a metastable austenitic stainless steel by cyclic deformation-induced martensitic transformation at 103 K, Materials Science and Engineering : A, vol.159, issue.1, pp.35-41, 1992.

J. F. Beltran, C. Cruz, R. Herrera, and O. Moroni, Shape memory alloy CuAlBe strands subjected to cyclic axial loads, Engineering Structures, vol.33, issue.10, pp.2910-2918, 2011.

O. , B. Mekki, and F. Auricchio, Performance evaluation of shape-memory-alloy superelastic behavior to control a stay cable in cable-stayed bridges, International Journal of Non-Linear Mechanics, vol.46, issue.2, pp.470-477, 2011.

M. Berrahmoune, Transformation martensitique et rupture différée dans l'acier austénitique instable 301LN, Arts et Métiers ParisTech, 2006.

M. Berrahmoune, S. Berveiller, . Inal, E. Moulin, and . Patoor, Analysis of the martensitic transformation at various scales in TRIP steel, Materials Science and Engineering : A, vol.378, issue.1-2, pp.304-307, 2004.

M. Berveiller and F. D. Fischer, Mechanics of Solids with Phase Changes, 1997.

M. Bigdeli-karimi, H. Arabi, A. Khosravani, and J. Samei, Effect of rolling strain on transformation induced plasticity of austenite to martensite in a high-alloy austenitic steel, Journal of Materials Processing Technology, vol.203, issue.1-3, pp.349-354, 2008.

R. Blondé, E. Jimenez-melero, L. Zhao, J. P. Wright, E. Brück et al., Mechanical stability of individual austenite grains in TRIP steel studied by synchrotron X-ray diffraction during tensile loading, Materials Science and Engineering : A, vol.618, pp.280-287, 2014.

C. Bouvet, De l'uniaxial au multiaxial : comportement pseudoelastique des alliages à mémoire de forme, 2001.

C. Bouvet, S. Calloch, and C. Lexcellent, A phenomenological model for pseudoelasticity of shape memory alloys under multiaxial proportional and nonproportional loadings, European Journal of Mechanics-A/Solids, vol.23, issue.1, pp.37-61, 2004.

F. Bruneseaux, E. Aeby-gautier, G. Geandier, J. Da-costa-teixeiraand-benoît-appolaire, P. Weisbecker et al., In situ characterizations of phase transformations kinetics in the Ti17 titanium alloy by electrical resistivity and high temperature synchrotron X-ray diffraction, Materials Science and Engineering A, vol.476, pp.60-68, 2008.

V. Buravalla and A. Khandelwal, Evolution kinetics in Shape Memory Alloys under arbitrary loading : Experiments and modeling, Mechanics of Materials, vol.43, issue.12, pp.807-823, 2011.

D. William, D. G. Callister, and . Rethwisch, Materials science and engineering : an introduction, 2010.

K. Sylvain-calloch, . Taillard, A. Shabnam, C. Chirani, É. Lexcellent et al., Relation between the martensite volume fraction and the equivalent transformation strain in shape memory alloys, Materials Science and Engineering A, 2006.

H. Cho, T. Yamamoto, Y. Takeda, A. Suzuki, and T. Sakuma, Exploitation of shape memory alloy actuator using resistance feedback control and its development, Progress in Natural Science : Materials International, vol.20, pp.97-103, 2010.

A. Col and M. Colombié, L'emboutissage des aciers. Dunod, 2010.

M. Collado, R. Cabás, D. Fernández, L. Moreno, F. López et al., Shape memory alloy rotary actuator for operation in mars, 13th European Space Mechanisms and Tribology Symposium -ESMATS, 2009.

M. Colombié, Matériaux métalliques -2ème édition -NP, 2012.

M. Coret, Étude expérimentale et simulation de la plasticité de transformation et du comportement multiphase de l'acier de cuve 16MND5 sous chargement multiaxial anisotherme, 2001.

R. Dasgupta, A. K. Jain, P. Kumar, S. Hussein, and A. Pandey, Effect of alloying constituents on the martensitic phase formation in some Cu-based SMAs, Journal of Materials Research and Technology, vol.3, issue.3, pp.264-273, 2014.

K. Amar, D. C. De, M. C. Murdock, J. G. Mataya, D. K. Speer et al., Quantitative measurement of deformation-induced martensite in 304 stainless steel by X-ray diffraction, Scripta Materialia, vol.50, issue.12, pp.1445-1449, 2004.

S. Degallaix, B. Ilschner, M. Boussuge, J. Chaix, and C. , Traité des Matériaux : Tome 2, Caractérisation expérimentale des matériaux : propriétés physiques, thermiques et mécaniques. PPUR, 2007.

J. Delomel, Résistivité des métaux et alliages. Techniques de l'ingénieur. Constantes physico-chimiques, vol.5, 2009.

K. P. Dharmasena and H. N. Wadley, Electrical Conductivity of Open-cell Metal Foams, Journal of Materials Research, vol.17, issue.03, pp.625-631, 2002.

S. Durmoo, C. Richard, G. Beranger, and Y. Moutia, Biocorrosion of stainless steel grade 304l (SS304l) in sugar cane juice, Electrochimica Acta, vol.54, issue.1, pp.74-79, 2008.

R. Echchorfi, Dialogue essais-simulation et identification de lois de comportement d'alliage à mémoire de forme en chargement multiaxial, 2013.

A. P. Day, Channel 5 User Manual, 2001.

S. Etienne, L. David, E. Gaudry, P. Lagrange, J. Ledieu et al., Les matériaux de A à Z -300 entrées et des exemples pour comprendre, 2008.

M. D. Fall, O. Hubert, K. Taillard, and A. Maynadier, In-situ X-Rays Diffraction and Multiscale Modeling of Shape Memory Alloys, Fracture, Fatigue, Failure, and Damage Evolution, vol.5, pp.157-164, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01021810

D. Fernandez, R. Cabas, and L. Moreno, Ultralight dust wiper mechanism for operation in Mars, pp.65270-65270, 2007.

S. Gallée, P. Y. Manach, and S. Thuillier, Mechanical behavior of a metastable austenitic stainless steel under simple and complex loading paths, Materials Science and Engineering : A, vol.466, issue.1-2, pp.47-55, 2007.

S. Gallée, Caractérisation expérimentale et simulation numérique des procédés d'emboutissage profond : application aux aciers inoxydables austénitiques, 2005.

P. Gédouin, Étude et commande d'actionneurs à base d'alliages à mémoire de forme, 2010.

. Pierre-antoine-gedouin, S. Shabnam-arbab-chirani, and . Calloch, Phase proportioning in CuAlBe shape memory alloys during thermomechanical loadings using electric resistance variation, International Journal of Plasticity, vol.26, issue.2, pp.258-272, 2010.

T. P. Gill, V. Shankar, M. Vijayalakshmi, and P. Rodriguez, Influence of carbon on the transformation kinetics of delta-ferrite in type 316 stainless steel weld metals, Scripta Metallurgica et Materialia, vol.27, issue.3, pp.313-318, 1992.

C. Grabe and O. T. Bruhns, Path dependence and multiaxial behavior of a polycrystalline NiTi alloy within the pseudoelastic and pseudoplastic temperature regimes, International Journal of Plasticity, vol.25, issue.3, pp.513-545, 2009.

A. Grajcar, W. Zalecki, P. Skrzypczyk, A. Kilarski, A. Kowalski et al., Dilatometric study of phase transformations in advanced high-strength bainitic steel, Journal of Thermal Analysis and Calorimetry, vol.118, issue.2, pp.739-748, 2014.

J. R. Guimarães, The kinetics of deformation induced martensite, Scripta Metallurgica, vol.10, issue.3, pp.223-227, 1976.

S. Guo, X. Sun, K. Ishii, and J. Guo, SMA Actuator-based novel type of peristaltic micropump, International Conference on Information and Automation, pp.1620-1625, 2008.

P. Hau?ild and V. Davydov, Michal Landa, and Philippe Pilvin. Characterization of strain-induced martensitic transformation in a metastable austenitic stainless steel, Materials and Design, vol.31, pp.1821-1827, 2010.

J. Huang, X. , Y. E. , and Z. Xu, Effect of Cold Rolling on Microstructure and Mechanical Properties of AISI 301ln Metastable Austenitic Stainless Steels, Journal of Iron and Steel Research, International, vol.19, issue.10, pp.59-63, 2012.

E. Ishimaru, H. Hamasaki, and F. Yoshida, Deformation-induced Martensitic Transformation and Workhardening of Type 304 Stainless Steel Sheet During Draw-bending, Procedia Engineering, vol.81, pp.921-926, 2014.

P. ?ittner and V. Novák, Experiment feedbacks in micromechanics modeling of thermomechanical behaviors of SMA polycrystals, Scripta Materialia, vol.51, issue.4, pp.321-326, 2004.

J. Kim, W. Park, M. Chun, J. Kim, J. Bae et al., Effect of pre-straining on lowtemperature mechanical behavior of AISI 304l, Materials Science and Engineering : A, vol.543, pp.50-57, 2012.

U. Krupp, H. Christ, P. Lezuo, H. J. Maier, and R. G. Teteruk, Influence of carbon concentration on martensitic transformation in metastable austenitic steels under cyclic loading conditions, Materials Science and Engineering : A, vol.319, pp.527-530, 2001.

U. Krupp, C. West, and H. Christ, Deformation-induced martensite formation during cyclic deformation of metastable austenitic steel : Influence of temperature and carbon content, Materials Science and Engineering : A, 2008.

A. L. Pécheur, Fatigue thermique d'un acier inoxydable austénitique : influence de l'état de surface par une approche multi-échelles, 2008.

A. A. Lebedev and V. V. Kosarchuk, Influence of phase transformations on the mechanical properties of austenitic stainless steels, International Journal of Plasticity, vol.16, issue.7, pp.749-767, 2000.

A. C. Lewis and S. Wright, Advanced Electron Backscatter Diffraction Applications and Techniques, JOM, vol.65, issue.9, pp.1221-1221, 2013.

C. Lexcellent, A. Vivet, C. Bouvet, S. Calloch, and P. Blanc, Experimental and numerical determinations of the initial surface of phase transformation under biaxial loading in some polycrystalline shape-memory alloys, Journal of the Mechanics and Physics of Solids, vol.50, issue.12, pp.2717-2735, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00079417

C. Lexcellent, Les alliages à mémoire de forme, Hermes Science Publications, 2013.

M. Linderov, C. Segel, A. Weidner, H. Biermann, and A. Vinogradov, Deformation mechanisms in austenitic TRIP/TWIP steels at room and elevated temperature investigated by acoustic emission and scanning electron microscopy, Materials Science and Engineering : A, vol.597, pp.183-193, 2014.

T. Maitland and S. Sitzman, Electron backscatter diffraction (EBSD) technique and materials characterization examples, vol.14, 2007.

B. Malard, Caractérisation multiéchelle par diffraction de neutrons et rayonnement synchrotron de la transformation martensitique sous contrainte dans un alliage à mémoire de forme CuAlBe, École Nationale Supérieure d'Arts et Métiers, 2008.

J. Martin and A. George, Caractérisation expérimentale des matériaux. Number 3 in Traité des matériaux, Presses polytechniques et universitaires romandes, 1998.

R. Mehrabi, M. T. Andani, M. Kadkhodaei, and M. Elahinia, Experimental Study of NiTi Thin-Walled Tubes Under Uniaxial Tension, Torsion, Proportional and Non-Proportional Loadings, Experimental Mechanics, 2015.

G. Walter and M. , The theory of composites, Cambridge Monographs on Applied and Computational Mathematics, 2002.

J. Jaronie-mohd, M. Leary, A. Subic, and M. A. Gibson, A review of shape memory alloy research, applications and opportunities, Materials & Design, vol.56, pp.1078-1113, 2014.

D. Mohr and J. Jacquemin, Large deformation of anisotropic austenitic stainless steel sheets at room temperature : Multi-axial experiments and phenomenological modeling, Journal of the Mechanics and Physics of Solids, vol.56, issue.10, pp.2935-2956, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00826131

S. Montecinos and A. Cuniberti, Thermomechanical behavior of a CuAlBe shape memory alloy, Journal of Alloys and Compounds, vol.457, issue.1-2, pp.332-336, 2008.

S. Montecinos, A. Cuniberti, and A. Sepúlveda, Grain size and pseudoelastic behaviour of a Cu-Al-Be alloy, Materials Characterization, vol.59, issue.2, pp.117-123, 2008.

S. Montecinos, M. O. Moroni, and A. S. , Superelastic behavior and damping capacity of cualbe alloys, Materials Science and Engineering : A, vol.419, issue.1, pp.91-97, 2006.

O. Muránsky, P. ?ittner, J. Zrnik, and E. C. Oliver, The Structure Dependence of Deformation Behavior of Transformation-Induced Plasticity-Assisted Steel Monitoring by In-Situ Neutron Diffraction, Metallurgical and Materials Transactions A, vol.39, issue.13, pp.3097-3104, 2008.

R. Dehsorkhi, S. Sabooni, F. Karimzadeh, A. Rezaeian, and M. H. Enayati, The effect of grain size and martensitic transformation on the wear behavior of AISI 304l stainless steel, Materials & Design, vol.64, pp.56-62, 2014.

E. Nagy, V. Mertinger, F. Tranta, and J. Sólyom, Deformation induced martensitic transformation in stainless steels, Materials Science and Engineering : A, vol.378, issue.1-2, pp.308-313, 2004.

G. B. Olson and M. Cohen, Kinetics of strain-induced martensitic nucleation, Metallurgical Transactions A, vol.6, issue.3, pp.791-795, 1975.

K. Otsuka, T. Ren, and . Takeda, Experimental test for a possible isothermal martensitic transformation in a Ti-Ni alloy, Scripta Materialia, vol.45, issue.2, pp.145-152, 2001.

E. Patoor and M. Berveiller, Technologie des alliages à mémoire de forme : comportement mécanique et mise en oeuvre, Hermes, 1994.

L. Petrini, F. Migliavacca, L. Petrini, and F. Migliavacca, Biomedical Applications of Shape Memory Alloys, Biomedical Applications of Shape Memory Alloys, Journal of Metallurgy, 2011.

J. Post, H. Nolles, K. Datta, and H. J. Geijselaers, Experimental determination of the constitutive behaviour of a metastable austenitic stainless steel, Materials Science and Engineering : A, vol.498, issue.1-2, pp.179-190, 2008.

M. Radu, J. Valy, A. F. Gourgues, F. L. Strat, and A. Pineau, Continuous magnetic method for quantitative monitoring of martensitic transformation in steels containing metastable austenite, Scripta Materialia, vol.52, issue.6, pp.525-530, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00172955

, Étude et modélisation du comportement cyclique des Alliages à Mémoire de Forme, 2009.

M. Luc-saint-sulpice and . Lakrit, Electric resistivity as phase volume fractions indicator in metastable alloys, Materials Science Forum, pp.56-61, 2013.

J. Scholz, Experimental analysis and modelling of the mechanical behaviour of an unstable austenitic stainless steel, 2002.

A. J. Schwartz, M. Kumar, and B. L. Adams, Electron Backscatter Diffraction in Materials Science, 2000.

J. Serri, Caractérisation expérimentale et modélisation du comportement plastique d'aciers à transformation martensitique : applications à la mise en forme, 2006.

M. Shaira, N. Godin, P. Guy, L. Vanel, and J. Courbon, Evaluation of the strain-induced martensitic transformation by acoustic emission monitoring in 304l austenitic stainless steel : Identification of the AE signature of the martensitic transformation and power-law statistics, Materials Science and Engineering : A, vol.492, issue.1-2, pp.392-399, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00433953

A. M. Sharabash and B. O. Andrawes, Application of shape memory alloy dampers in the seismic control of cable-stayed bridges. Engineering Structures, vol.31, pp.607-616, 2009.

A. Smits, D. Van-hemelrijck, T. P. Philippidis, and A. Cardon, Design of a cruciform specimen for biaxial testing of fibre reinforced composite laminates, Composites Science and Technology, vol.66, issue.7-8, pp.964-975, 2006.

N. Solomon and I. Solomon, Deformation induced martensite in AISI 316 stainless steel, Revista de Metalurgia, vol.46, issue.2, pp.121-128, 2010.

D. Song, G. Kang, Q. Kan, C. Yu, and C. Zhang, Nonproportional multiaxial whole-life transformation ratchetting and fatigue failure of super-elastic NiTi shape memory alloy micro-tubes, International Journal of Fatigue, vol.80, pp.372-380, 2015.

K. Taillard, Étude du comportement thermomécanique des alliages à mémoire de forme sous sollicitations multiaxiales complexes, 2006.

K. Taillard, A. Shabnam, S. Chirani, C. Calloch, and . Lexcellent, Equivalent transformation strain and its relation with martensite volume fraction for isotropic and anisotropic shape memory alloys, Mechanics of Materials, vol.40, issue.4-5, pp.151-170, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00263827

K. Tao, D. W. Brown, S. C. Vogel, and H. Choo, Texture evolution during strain-induced martensitic phase transformation in 304l stainless steel at a cryogenic temperature, Metallurgical and Materials Transactions A, vol.37, issue.12, pp.3469-3475, 2006.

J. ?uksza, M. Rumi?ski, W. Ratuszek, and M. Blicharski, Texture evolution and variations of ?-phase volume fraction in cold-rolled AISI 301 steel strip, Journal of Materials Processing Technology, vol.177, issue.1-3, pp.555-560, 2006.

P. Vacher and C. Lexcellent, Study of pseudoelastic behavior of polycrystalline SMA by resistivity measurements and acoustic emission, Proc. of ICM VI, vol.6, pp.231-236, 1991.

K. Verbeken, N. Van-caenegem, and D. Raabe, Identification of epsilon martensite in a Fe-based shape memory alloy by means of EBSD, Micron, vol.40, issue.1, pp.151-156, 2009.

B. Vieille, J. F. Michel, M. L. Boubakar, and C. Lexcellent, Validation of a 3d numerical model of shape memory alloys pseudoelasticity through tensile and bulging tests on CuAlBe sheets, International Journal of Mechanical Sciences, vol.49, issue.3, pp.280-297, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00330446

G. Vértesy, I. Mészáros, and I. Tomá?, Nondestructive magnetic characterization of TRIP steels, NDT & E International, vol.54, pp.107-114, 2013.

Y. Waseda, E. Matsubara, and K. Shinoda, X-Ray Diffraction Crystallography, 2011.

A. Weidner, A. Glage, and H. Biermann, In-situ characterization of the microstructure evolution during cyclic deformation of novel cast TRIP steel, Procedia Engineering, vol.2, pp.1961-1971, 2010.

W. Zhou, Y. Tang, R. Song, L. Jiang, K. S. Hui et al., Characterization of electrical conductivity of porous metal fiber sintered sheet using four-point probe method, Materials & Design, vol.37, pp.161-165, 2012.