M. Bouchereau, Génie mécanique des caoutchoucs, 1997.

M. Nakache, Délamination cathodique des assemblages élastomère/métal en milieu marin, 2011.

J. Ramier, Comportement mécanique d'élastomères chargés, Inuence de l'adhésion charge-polymère, Inuence de la morphologie, 2004.

S. Guggenberger, Neoprene (Polychloroprene)-Based Solvent and Latex Adhesives, Handbook of Adhesives, p.284306, 1990.
DOI : 10.1007/978-1-4613-0671-9_15

E. Papon, La chimie et la mise en oeuvre des adhésifs, 2015.

J. Cognard, Science et Technologie du collage, Presses polytechniques et universitaires romandes edition, 2000.

R. Schmidt and J. Bell, Epoxy adhesion to metals, Epoxy Resins and Composites II, number 75 in Advances in Polymer Science, p.33
DOI : 10.1007/BFb0017914

S. Chauaille, Durabilité des assemblages collés : aspects mécaniques et physicochimiques, 2011.

M. Bordes, Etude du vieillissement des liaisons adhésives en milieu marin pour application oshore, 2009.

M. Bruneaux, Durabilité des assemblages collés : modélisation mécanique et physicochimique, Ecole Nationale des Ponts et Chaussées, 2004.

R. Adams, J. Comyn, and W. Wake, Structural Adhesive Joints in Engineering, 1997.
DOI : 10.1007/978-94-009-5616-2

B. Sievers, Processing of elastomeric materials, 2001.

R. Dillingham and C. Moriarty, The adhesion of isocyanate-based polymers to steel, The Journal of Adhesion, vol.81, issue.3, p.269285, 2003.
DOI : 10.1080/00218460008029309

D. Mercier, Techniques de caractérisation physico-chimiques des surfaces et interfaces : application aux phénomènes d'adhésion

R. Créac-'hcadec, Assemblages multimatériaux : contributions expérimentales et numériques aux méthodes de dimensionnement des assemblages collés, 2014.

P. Montois, Durabilité des joints de colle structuraux époxyde/alliage de Titane. Application à l'étude d'une interphase modèle, 2003.

N. Arnaud, Analyse de l'eet du vieillissement en milieu humide sur le comportement mécanique d'adhésifs en assemblages sous sollicitations multiaxiales, 2014.

D. Post, R. Czarnek, and D. Joh, Deformations and Strains in a Thick Adherend Lap Joints, in durability of Structural Adhesives, 1988.

J. Cognard, P. Davies, B. Gineste, and L. Sohier, Development of an improved adhesive test method for composite assembly design, Composites Science and Technology, vol.65, issue.3-4, p.65359368, 2005.
DOI : 10.1016/j.compscitech.2004.09.008

J. Maurice, J. Cognard, and R. Créac-'hcadec, Characterization and modelling of the 3D elastic???plastic behaviour of an adhesively bonded joint under monotonic tension/compression-shear loads: influence of three cure cycles, Journal of Adhesion Science and Technology, vol.87, issue.2, 2012.
DOI : 10.1080/00218464.2011.597318
URL : https://hal.archives-ouvertes.fr/hal-00726679

R. Créac-'hcadec, G. Jamin, and J. Cognard, Experimental analysis of the mechanical behavior of a thick exible adhesive under tensile/compression-shearloads. Adhesion and Adhesives, 2013.

M. Vallat, Tests d'adhérence et pertinence des mesures, 2015.

F. Niesiolowski and D. Aubrey, Stress Distribution during Peeling of Adhesive Tapes, The Journal of Adhesion, vol.13, issue.1, p.8798, 1981.
DOI : 10.1122/1.548850

R. Fedors, Osmotic effects in water absorption by polymers, Polymer, vol.21, issue.2, pp.207-212, 1980.
DOI : 10.1016/0032-3861(80)90062-2

J. Verdu, Action de l'eau sur les plastiques, 2000.

X. Levêque, Behaviour of various elastomers in a marine environment, Polymers in a Marine Environment Conference, 1984.

P. Gac, V. L. Saux, M. Paris, and Y. Marco, Ageing mechanism and mechanical degradation behaviour of polychloroprène rubber in a marine environment : Comparison of accelerated ageing and long term exposure, Polymer Degradation and Stability, 2011.

V. , L. Saux, P. Gac, Y. Marco, and S. Calloch, Limits in the validity of Arrhenius predictions for eld ageing of a silica lled polychloroprene in a marine environment, Polymer Degradation and Stability, 2013.

P. Sae-oui, C. Sirisinha, and U. Thepsuwan, Dependance of mechanical and aging properties of chloroprene rubber on silica and ethylene thiourea loadings, European Polymere Journal, 2007.

Y. Zhang, R. Adams, and L. Silva, Absorption and glass transition temperature of adhesives exposed to water and toluene, International Journal of Adhesion and Adhesives, vol.50, 2014.
DOI : 10.1016/j.ijadhadh.2014.01.022

P. Gac, Durabilité du polychloroprène pour application marine Ecole nationale supérieure d'arts et métiers -ENSAM, 2014.

J. Verdu, Plastiques, Action de l'eau. Techniques de l'ingénieur, 1985.

I. Mkacher, Vieillissement thermique des gaines PE et PVC de câbles électriques, 2013.

H. Yamabe, Inuence of Water on the Interface Properties, Design of Adhesive Joints Under Humid Conditions, p.95

G. Socrates, Infrared and Raman characteristic group frequencies : tables and charts, 2004.

M. Castellano, A. Turturro, P. Riani, T. Montanari, E. Finocchio et al., Bulk and surface properties of commercial kaolins, Applied Clay Science, vol.48, issue.3, p.446454, 2010.
DOI : 10.1016/j.clay.2010.02.002

Q. Beuguel, J. Ville, J. Crepin-leblond, P. Mederic, and T. Aubry, Comparative study of the structural and rheological properties of PA6 and PA12 based synthetic talc nanocomposites, Polymer, vol.62, 2015.
DOI : 10.1016/j.polymer.2015.02.031

Q. Beuguel, J. Ville, J. Crepin-leblond, P. Mederic, and T. Aubry, Inuence of formulation on morphology and rheology of polypropylene/polyamide blends lled with nanoclay mineral particles, Applied Clay Science, vol.147, p.168175, 2017.

Q. Beuguel, J. Ville, J. Crepin-leblond, P. Mederic, and T. Aubry, Inuence of clay mineral structure and polyamide polarity on the structural and morphological properties of clay polypropylene/polyamide nanocomposites, Applied Clay Science, p.253259, 2017.

A. Einstein, Zur Theorie der Brownschen Bewegung, Annalen der Physik, vol.1, issue.2, p.371381, 1906.
DOI : 10.1002/andp.19063240208

H. Smallwood, Limiting Law of the Reinforcement of Rubber, Journal of Applied Physics, vol.15, issue.11, p.758766, 1944.

E. Guth and O. Gold, On the hydrodynamical theory of the viscosity of suspensions, Phys. Rev, vol.53, issue.322, p.215, 1938.

E. Guth, Theory of Filler Reinforcement, Journal of Applied Physics, vol.16, issue.1, p.2025, 1945.

J. Halpin, Stiness and expansion estimates for oriented short ber composites, Journal of Composite Materials, vol.3, issue.4, p.732734, 1969.
DOI : 10.1177/002199836900300419

V. Vand, Viscosity of Solutions and Suspensions. I. Theory, The Journal of Physical and Colloid Chemistry, vol.52, issue.2, p.277299, 1948.
DOI : 10.1021/j150458a001

R. Simha, The Inuence of Brownian Movement on the Viscosity of Solutions, The Journal of physical chemistry, vol.44, issue.1, p.2534, 1940.

S. Wol and J. Donnet, Characterization of llers in vulcanizates according to the Einstein-Guth-Gold equation, Rubber Chemistry and Technology, vol.63, issue.1, p.3245, 1990.

J. Bergstrom and M. Boyce, Mechanical behavior of particle lled elastomers. Rubber chemistry and technology, p.633656, 1999.

G. Heinrich, M. Klüppel, and T. Vilgis, Reinforcement of elastomers, Current Opinion in Solid State and Materials Science, vol.6, issue.3, p.195203, 2002.
DOI : 10.1016/S1359-0286(02)00030-X

J. Abhijit, B. Dutta, and A. Bhowmick, Eect of llers and plasticizers on the performance of novel heat and oil-resistant thermoplastic elastomers from nylon, p.6

M. Bakar and F. Djaider, Eect of Plasticizers Content on the Mechanical Properties of Unsaturated Polyester Resin, Journal of Thermoplastic Composite Materials, vol.20, issue.1, p.5364, 2007.

N. Hewitt and P. Ciullo, Compounding Precipitated Silica in Elastomers : Theory and Practice, 2007.
DOI : 10.1016/b978-081551528-9.50012-6

L. Mullins, Eect of stretching on the properties of rubber, Rubber Chemistry and Technology, vol.21, issue.2, p.281300, 1948.

L. Mullins, Softening of rubber by deformation. Rubber chemistry and technology, p.339362, 1969.

F. Barlow and M. Dekker, Rubber compounding, principles, materials, and techniques, 1988.

J. Martin-martinez, Rubber base adhesives In The mechanics of Adhesion, 2002.

R. Gra and G. Baseden, Neoprene and Hypalon, Rubber Technology, p.339374, 1999.

J. Dick and C. Rader, Raw Materials Supply Chain for Rubber Products, Raw Materials Supply Chain for Rubber Products, 2014.

R. Datta, Rubber Curing Systems. iSmithers Rapra Publishing, 2002.
DOI : 10.1201/9781420007183.sec3

B. Rodgers, Rubber Compounding : Chemistry and Applications, Second Edition, 2015.
DOI : 10.1201/b18931

B. Velayudhan and J. Das, Studies on rubber compositions as passive acoustic materials in underwater electro acoustic transducer technology-and their aging characteristics, 2003.

E. Papon, Adhesive Families, Handbook of Adhesion Technology, p.315339, 2011.
DOI : 10.1007/978-3-642-01169-6_14

A. Aymonier and E. Papon, Designing Soft Reactive Adhesives by Controlling Polymer Chemistry, MRS Bulletin, vol.11, issue.06, p.424427, 2003.
DOI : 10.1016/0033-0655(81)80002-7

R. Campion, The Inuence of Structure on Autohesion (Self-Tack) and other forms of Diusion into Polymers, The Journal of Adhesion, vol.7, issue.1, p.123, 1975.

K. Hoehne, The Curing of Polychloroprene Coating Materials with Polyisocyanates, Rubber Chemistry and Technology, vol.42, issue.2, p.394403, 1969.
DOI : 10.5254/1.3539217

R. Whitehouse, Synthetic Adhesives and Sealants. Wake w.c edition, 1986.

J. , M. Bain, and D. Hopkins, On adhesives and adhesive action, Journal of Physical Chemistry, p.188204, 1925.

D. Packham and C. Johnson, Mechanical adhesion: were McBain and Hopkins right? An empirical study, International Journal of Adhesion and Adhesives, vol.14, issue.2, p.131135, 1994.
DOI : 10.1016/0143-7496(94)90008-6

S. Ebnesajjad and A. Landrock, Adhesives Technology Handbook, 2014.

L. Sharpe, The Interphase in Adhesion, The Journal of Adhesion, vol.19, issue.1, p.5164, 1972.
DOI : 10.1002/pol.1969.110070410

W. Wake, Theories of adhesion and uses of adhesives: a review, Polymer, vol.19, issue.3, p.291308, 1978.
DOI : 10.1016/0032-3861(78)90223-9

A. Kinloch, The science of adhesion, Journal of Materials Science, vol.14, issue.11, pp.2141-2166, 1980.
DOI : 10.5254/1.3542926

A. Kinloch, Adhesion and Adhesives-Science and Technology, 1987.

W. Wake, Adhesion and the formulation of adhesives, Applied Science Publishers, vol.21, 1983.

S. Voyutskii and V. Vakula, The role of diusion phenomena in polymer-to-polymer adhesion, Journal of Applied Polymer Science, vol.7, issue.2, p.475491, 1963.

P. and D. Gennes, Polymers at an interface, a simplied view Advances in colloïd an interface science, 1987.

L. Sharpe, Adhesion International : 10th Proceedings, 1988.

N. Sung, Eect of bonding temperature on the joint strength of polyolen/butyl rubber and polyolen/ethylene-vinylacetate copolymer, Polymer Engineering & Science, vol.19, issue.11, p.810814, 1979.

K. Allen, A Review of Contemporary Views of Theories of Adhesion, The Journal of Adhesion, vol.2, issue.3-4, p.261277, 1987.
DOI : 10.1080/00218467508078895

S. Wu, H. Chuang, and C. Han, Diuse interface between polymers : Structure and kinetics, Journal of Polymer Science Part B : Polymer Physics, vol.24, issue.1, p.143159, 1986.

S. Buchan and W. Rae, Chemical Nature of the Rubber-To-Brass Bond, Rubber Chemistry and Technology, vol.19, issue.4, p.968986, 1946.
DOI : 10.5254/1.3543264

L. Lavielle and J. Schultz, L'adh??sion polym??re-m??tal, Mat??riaux & Techniques, vol.72, issue.6-7, pp.6-7, 1984.
DOI : 10.1051/mattech/198472060215

W. Van-ooij, A. Sabata, and A. Appelhans, Application of surface analysis techniques to the study of paint/metal interfaces related to adhesion and corrosion performance, Surface and Interface Analysis, vol.20, issue.7, p.403420, 1991.
DOI : 10.1021/bk-1990-0440.ch005

J. Bikerman, CAUSES OF POOR ADHESION: WEAK BOUNDARY LAYERS, Industrial & Engineering Chemistry, vol.59, issue.9, p.4044, 1967.
DOI : 10.1021/ie51403a010

C. Creton and E. Papon, Materials Science of Adhesives: How to Bond Things Together, MRS Bulletin, vol.18, issue.7, p.419423, 2003.
DOI : 10.1007/978-1-4684-7781-8

J. Schultz and M. Nardin, Some Physico-Chemical Aspects of the Fibre-Matrix Interphase in Composite Materials, The Journal of Adhesion, vol.311, issue.1-4, pp.1-45971, 1994.
DOI : 10.1007/BF01130197

P. Montois, V. Nassiet, J. Petit, and D. Adrian, Viscosity eect on epoxydiamine/metal interphases-Part II : Mechanical resistance and durability, International Journal of Adhesion and Adhesives, vol.27, issue.2, p.145155, 2007.

C. Schollenberger, Polyurethane- and Isocyanate-Based Adhesives, Handbook of Adhesives, p.359380, 1990.
DOI : 10.1007/978-1-4613-0671-9_20

R. Arnold, J. Nelson, and J. Verbanc, Recent Advances In Isocyanate Chemistry, Chemical Reviews, vol.57, issue.1, p.4776, 1957.
DOI : 10.1021/cr50013a002

D. Dieterich, Aqueous emulsions, dispersions and solutions of polyurethanes; synthesis and properties, Progress in Organic Coatings, vol.9, issue.3, p.281340, 1981.
DOI : 10.1016/0033-0655(81)80002-7

J. Buist and W. Naunton, Rubber Bonding, Rubber Chemistry and Technology, vol.23, issue.4, p.945971, 1950.
DOI : 10.5254/1.3547099

R. Créac-'hcadec, Analyse et modélisation du comportement non linéaire d'assemblages collés pour application marine, 2008.

O. Tramis, R. Brethous, B. Hassoune-rhabbour, M. Fazzini, and V. Nassiet, Experimental investigation on the eect of nanostructuration on the adherence properties of epoxy adhesives by a probe tack test, International Journal of Adhesion and Adhesives, p.672230, 2016.

B. Hassoune-rhabbour, V. Nassiet, and Y. Baziard, Le test couronne pour la mesure de l'adh??rence substrat-adh??sif, Mat??riaux & Techniques, vol.36, issue.2, p.123132, 2009.
DOI : 10.1051/mattech/2009031

R. Adams, Testing Adhesives, useful or not. Adhesion, 1991.
DOI : 10.1007/978-94-011-3854-3_1

J. Cognard, R. Créac-'hcadec, and L. Sohier, Inuence of adhesive thickness on the behaviour of the bonded assemblies under shear loading using a modied TAST xture, International Journal of Adhesion and Adhesives, 2010.

J. Cognard, R. Créach-'cadec, and L. Silva, Experimental analysis of the inuence of hydrostatic stress on the behavior of an adhesive using a pressure vessel, Journal of Adhesion, 2011.

A. Moradi, D. Leguillon, and N. Carrère, Inuence of the adhesive thickness on a debonding An asymptotic model, Engineering Fracture Mechanics, vol.114, p.5568, 2013.

A. Akisanya and N. Fleck, Interfacial cracking from the free edge of a long bimaterial strip, International Journal of Solids and Structures, 1997.

A. Stevenson, On the durability of rubber/metal bonds in seawater, International Journal of Adhesion and Adhesives, vol.5, issue.2, 1985.
DOI : 10.1016/0143-7496(85)90020-X

K. Kendall, Peel Adhesion of Solid Films-The Surface and Bulk Eects, The Journal of Adhesion, vol.5, issue.3, p.179202, 1973.

J. Cook, S. Edge, and D. Packham, The adhesion of natural rubber to steel and the use of the peel test to study its nature, International Journal of Adhesion and Adhesives, vol.17, issue.4, p.333337, 1997.
DOI : 10.1016/S0143-7496(97)00024-9

V. Nassiet, Vieillissement et durabilité des assemblages collés

P. Flory, Principles of Polymer Chemistry, 1953.

D. Van-krevelen and K. Nijenhuis, Properties of Polymers : Their Correlation with Chemical Structure ; their Numerical Estimation and Prediction from Additive Group Contributions, 2009.

A. Thomas and K. Muniandy, Absorption and desorption of water in rubbers, Polymer, vol.28, issue.3, p.408415, 1987.
DOI : 10.1016/0032-3861(87)90193-5

P. Gac, D. Choqueuse, and D. Melot, Description and modeling of polyurethane hydrolysis used as thermal insulation in oil oshore conditions, Polymer Testing, vol.32, issue.8, p.15881593, 2013.

N. Schneider, L. Dusablon, L. Spano, H. Hopfenberg, and F. Votta, Sorption and diusion of water in a rubbery polyurethane, Journal of Applied Polymer Science, vol.12, issue.3, p.527532, 1968.

K. Ab-malek and A. Stevenson, The eect of 42 year immersion in sea-water on natural rubber, Journal of Materials Science, vol.21, issue.1, p.147154, 1986.

P. Gac, M. Arhant, P. Davies, and A. Muhr, Fatigue behavior of natural rubber in marine environment : Comparison between air and sea water, Materials & Design, vol.65, p.462467, 2015.

J. Hinkley and B. Holmes, Eect of water on the strength of lled polychloroprene vulcanizates, Journal of Applied Polymer Science, vol.32, issue.5, p.48734881, 1986.

M. Gordon, C. Hope, L. Loan, and R. Roe, The Polymerization of Water in Benzene and Toluene, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.258, issue.1293, p.258215236, 1293.
DOI : 10.1098/rspa.1960.0183

J. Barrie and B. Platt, The diusion and clustering of water vapour in polymers, Polymer, vol.4, p.303313, 1963.

X. Gu, C. Gryte, and A. Nowick, Dielectric relaxation and deuteron NMR of water in polyimide lms, Journal of Applied Physics, vol.66, issue.11, p.52905296, 1989.

P. Gac, G. Roux, P. Davies, B. Fayolle, and J. Verdu, Water clustering in polychloroprene, Polymer, issue.12, p.5528612866, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01058318

J. Mijovi¢ and H. Zhang, Molecular Dynamics Simulation Study of Motions and Interactions of Water in a Polymer Network, The Journal of Physical Chemistry B, vol.108, issue.8, p.25572563, 2004.
DOI : 10.1021/jp036181j

G. Marque, S. Neyertz, J. Verdu, V. Prunier, and D. Brown, Molecular Dynamics Simulation Study of Water in Amorphous Kapton, Macromolecules, vol.41, issue.9, pp.413349-3362, 2008.
DOI : 10.1021/ma702173j
URL : https://hal.archives-ouvertes.fr/hal-00315682

S. Li, Y. Pak, K. Adamic, S. Greenbaum, B. Lim et al., Diffusion and Deuteron Nuclear Magnetic Resonance Study of the Distribution of Water Molecules in Polyimide Films, Journal of The Electrochemical Society, vol.139, issue.3, pp.662-667, 1992.
DOI : 10.1149/1.2069281

G. Briggs, D. Edwards, and E. Storey, Water Absorption of Elastomers, Rubber Chemistry and Technology, vol.36, issue.3, p.621641, 1963.
DOI : 10.5254/1.3539593

J. Ball, Discontinuous Equilibrium Solutions and Cavitation in Nonlinear Elasticity, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.306, issue.1496, p.557611, 1496.
DOI : 10.1098/rsta.1982.0095

B. De-'nève and M. Shanahan, Water absorption by an epoxy resin and its eect on the mechanical properties and infra-red spectra, Polymer, issue.24, p.3450995105, 1993.

G. Wang, M. Li, and X. Chen, Eects of llers on mechanical properties of a water-swellable rubber, Journal of Applied Polymer Science, vol.72, issue.4, p.577584, 1999.

A. Riaya, M. Shaw, and A. Garton, Oxidation of Elastomers in Aqueous Environments, Rubber Chemistry and Technology, vol.67, issue.5, p.775785, 1994.
DOI : 10.5254/1.3538709

M. Celina, Review of polymer oxidation and its relationship with materials performance and lifetime prediction, Polymer Degradation and Stability, vol.98, issue.12, pp.2419-2429, 2013.
DOI : 10.1016/j.polymdegradstab.2013.06.024

G. Li and J. Koenig, A Review of Rubber Oxidation, Rubber Chemistry and Technology, vol.78, issue.3, p.355390, 2005.

M. Celina, J. Wise, D. Ottesen, K. Gillen, and R. Clough, Correlation of chemical and mechanical property changes during oxidative degradation of neoprene, Polymer Degradation and Stability, vol.68, issue.2, p.171184, 2000.
DOI : 10.1016/S0141-3910(99)00183-4

P. Mott and C. Roland, Aging of Natural Rubber in Air and Seawater, Rubber Chemistry and Technology, vol.74, issue.1, p.7988, 2001.
DOI : 10.5254/1.3547641

J. Crank, The mathematics of diusion. The mathematics of diusion, 1975.

H. Frisch, Diusion in polymers, Journal of Applied Polymer Science, vol.14, issue.6, 1970.

M. Gurtin and C. Yatomi, On a Model for Two Phase Diusion in Composite Materials, Journal of Composite Materials, vol.13, issue.2, p.126130, 1979.

H. Carter and K. Kibler, Langmuir-Type Model for Anomalous Moisture Diusion In Composite Resins, Journal of Composite Materials, vol.12, issue.2, p.118131, 1978.

B. Zimm and J. Lundberg, Sorption of Vapors by High Polymers, The Journal of Physical Chemistry, vol.60, issue.4, p.425428, 1956.
DOI : 10.1021/j150538a010

J. Barrie and B. Platt, The diusion and clustering of water vapour in polymers, Polymer, vol.4, p.303313, 1963.

C. Boggs and J. Blake, The Absorption of Water by Rubber, Industrial & Engineering Chemistry, vol.18, issue.3, p.224232, 1926.
DOI : 10.1021/ie50195a002

B. Fayolle and J. Verdu, Vieillissement physique des matériaux polymères -Vieillissement par migration d'adjuvants, 2005.

G. Johnson, H. Bair, S. Matsuoka, E. Anderson, and J. Scott, Water Sorption and Its Eect on a Polymer's Dielectric Behavior, Water in Polymers, p.451468, 1980.

J. Moisan, Diusion des additifs du polyethylene-I, European Polymer Journal, vol.16, issue.10, p.979987, 1980.

J. Klein and B. Briscoe, The Diusion of Long-Chain Molecules Through Bulk Polyethelene, Proceedings of the Royal Society of London A : Mathematical, Physical and Engineering Sciences, p.3655373, 1720.

J. Klein and B. Briscoe, Diusion of long molecules through solid polyethylene. II. Measurements and results, Journal of Polymer Science : Polymer Physics Edition, vol.15, issue.12, p.20652074, 1977.

J. Klein, Diffusion of long molecules through solid polyethylene. I. Topological constraints, Journal of Polymer Science: Polymer Physics Edition, vol.15, issue.12, pp.2057-2064, 1977.
DOI : 10.1002/pol.1977.180151201

P. Calvert and N. Billingham, Loss of additives from polymers: A theoretical model, Journal of Applied Polymer Science, vol.24, issue.2, p.357370, 1979.
DOI : 10.1002/app.1979.070240205

X. Colin, J. Verdu, and B. Rabaud, Stabilizer thickness proles in polyethylene pipes transporting drinking water disinfected by bleach, Polymer Engineering & Science, issue.8, p.5115411549, 2011.

M. Wahab, A. Crocombe, A. Beevers, and K. Ebtehaj, Coupled stressdiusion analysis for durability study in adhesively bonded joints, International Journal of Adhesion and Adhesives, vol.22, issue.1, p.6173, 2002.

E. Knox and M. Cowling, Durability aspects of adhesively bonded thick adherend lap shear joints, International Journal of Adhesion and Adhesives, vol.20, issue.4, p.323331, 2000.
DOI : 10.1016/S0143-7496(99)00063-9

D. Brewis, J. Comyn, A. Raval, and A. Kinloch, The eect of humidity on the durability of aluminium-epoxide joints, International Journal of Adhesion and Adhesives, vol.10, issue.4, p.247253, 1990.

S. Popineau and M. Shanahan, Simple model to estimate adhesion of structural bonding during humid ageing, International Journal of Adhesion and Adhesives, vol.26, issue.5, p.363370, 2006.
DOI : 10.1016/j.ijadhadh.2005.06.002
URL : https://hal.archives-ouvertes.fr/hal-00142201

R. Adams, R. Hinton, and C. Kii, The durability of adhesive joints and why they still break, Proc., 17th Int. Symposium Swissbonding, p.319327, 2003.

R. Adams, The eects of moisture on the durability and strength retention of single lap joints, 2005.

L. Leger, A study of the impact of humid aging on the strength of industrial adhesive joints, International Journal of Adhesion and Adhesives, vol.44, 2013.
DOI : 10.1016/j.ijadhadh.2013.02.001

D. Brewis, J. Comyn, and J. Tegg, The durability of some epoxide adhesive-bonded joints on exposure to moist warm air, International Journal of Adhesion and Adhesives, vol.1, issue.1, p.3539, 1980.
DOI : 10.1016/0143-7496(80)90032-9

K. Vine, P. Cawley, and A. Kinloch, The Correlation of Non-Destructive Measurements and Toughness Changes in Adhesive Joints during Environmental Attack, The Journal of Adhesion, vol.11, issue.2
DOI : 10.1080/00218469908009557

M. Zanni-dearges and M. Shanahan, Diusion of water into an epoxy adhesive : comparison between bulk behaviour and adhesive joints, International Journal of Adhesion and Adhesives, 1994.

A. Gent and C. Wang, Fracture mechanics and cavitation in rubber-like solids, Journal of Materials Science, vol.58, issue.12, 1991.
DOI : 10.1088/0959-5309/58/6/312

R. Gledhill and A. Kinloch, Environmental Failure of Structural Adhesive Joints, The Journal of Adhesion, vol.36, issue.1, p.315330, 1974.
DOI : 10.1080/00218467108081160

P. Fay and A. Maddison, Durability of adhesively bonded steel under salt spray and hydrothermal stress conditions, International Journal of Adhesion and Adhesives, vol.10, issue.3, p.179186, 1990.

R. Davis and P. Fay, The durability of bonded coated steel joints, International Journal of Adhesion and Adhesives, vol.13, issue.2, p.97104, 1993.
DOI : 10.1016/0143-7496(93)90020-A

H. Leidheiser, The mechanism for the cathodic delamination of organic coatings from a metal surface, Progress in Organic Coatings, vol.11, issue.1, 1983.
DOI : 10.1016/0033-0655(83)80002-8

A. Stevenson, Durability and life prediction of adhesive bonds in severe environments . Rubber Chemistry and technology, 1990.

W. Funke, U. Zorll, and B. Murthy, Interfacial eects in solid paint lms related to some lm properties, Journal Paint Technology, 1969.

M. Henderson, The interaction of water with solid surfaces: fundamental aspects revisited, Surface Science Reports, vol.46, issue.1-8, 2002.
DOI : 10.1016/S0167-5729(01)00020-6

R. Posner, O. Ozcan, and G. Grundmeier, Water and Ions at Polymer/Metal Interfaces, Design of Adhesive Joints Under Humid Conditions, Advanced Structured Materials, p.2152, 2013.
DOI : 10.1007/978-3-642-37614-6_2

R. Maurin, Y. Perrot, A. Bourmaud, P. Davies, and C. Baley, Seawater ageing of low styrene emission resins for marine composites: Mechanical behaviour and nano-indentation studies, Composites Part A: Applied Science and Manufacturing, vol.40, issue.8, p.4010241032, 2009.
DOI : 10.1016/j.compositesa.2008.01.013
URL : https://hal.archives-ouvertes.fr/hal-00494420

J. Maynard and W. Mochel, The structure of neoprene. VI. Crystallization, Journal of Polymer Science, vol.13, issue.69, p.235250, 1954.

K. Stöckelhuber, A. Svistkov, A. Pelevin, and G. Heinrich, Impact of Filler Surface Modication on Large Scale Mechanics of Styrene Butadiene/Silica Rubber Composites, Macromolecules, issue.11, p.4443664381, 2011.

H. Ismail, P. Freakley, I. Sutherland, and E. Sheng, Eects of multifunctional additive on mechanical properties of silica lled natural rubber compound, European Polymer Journal, issue.11, p.3111091117, 1995.

D. Jiang, G. Levchik, S. Levchik, C. Dick, J. Liggat et al., Thermal degradation of cross-linked polyisoprene and polychloroprene, Polymer Degradation and Stability, vol.68, issue.1, p.7582, 2000.
DOI : 10.1016/S0141-3910(99)00167-6

D. Gardner and I. Mcneill, The thermal degradation of polychloroprene-I thermal analysis studies of the stability of polychloroprene samples, and measurements of the kinetics of degradation, European Polymer Journal, vol.7, issue.6, p.569591, 1971.
DOI : 10.1016/0014-3057(71)90088-7

D. Williams and I. Fleming, Spectroscopic Methods in Organic Chemistry, 2005.

R. Silverstein, F. Webster, D. Kiemle, and D. Bryce, Spectrometric Identication of Organic Compounds, 2014.

P. Gac, V. L. Saux, M. Paris, and Y. Marco, Ageing mechanism and mechanical degradation behaviour of polychloroprene rubber in a marine environment : Comparison of accelerated ageing and long term exposure, Polymer Degradation and Stability, vol.97, issue.3, p.288296, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00703271

E. Wegman, Hyperdimensional Data Analysis Using Parallel Coordinates, Journal of the American Statistical Association, vol.53, issue.411, p.664675, 1990.
DOI : 10.1214/aos/1176349654

A. Inselberg, The plane with parallel coordinates. The Visual Computer, pp.69-91, 1985.

P. Gac, P. Roux, and . Davies, Water Clustering in polychloroprene, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01058318

I. Jollie, Principal Component Analysis, 2002.

K. Mardia, J. Kent, and J. Bibby, Multivariate Analysis, 1979.

W. Venables and B. Ripley, Modern Applied Statistics with S, Statistics ans Computing, 2002.
DOI : 10.1007/978-0-387-21706-2

M. Hubert, P. Rousseeuw, and T. Verdonck, A Deterministic Algorithm for Robust Location and Scatter, Journal of Computational and Graphical Statistics, vol.83, issue.1, pp.618-637, 2012.
DOI : 10.1080/01621459.1988.10478611

P. Rousseeuw and A. Leroy, Robust Regression and Outlier Detection, 2005.
DOI : 10.1002/0471725382

P. Rousseeuw and K. Driessen, A Fast Algorithm for the Minimum Covariance Determinant Estimator, Technometrics, vol.35, issue.3, p.212223, 1999.
DOI : 10.1080/01621459.1994.10476821

G. Pison, S. Van-aelst, and G. Willems, Small sample corrections for LTS and MCD, Metrika, vol.55, issue.12, p.111123, 2002.
DOI : 10.1007/s001840200191
URL : http://www.stat.ualberta.ca/~wiens/stat578/papers/Pison, Van Aelst %26 Willems.pdf

J. Ragot, M. Batton-hubert, and F. Breuil, Les STIC pour l'environnement 2011, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00654823

J. Macqueen, Some methods for classication and analysis of multivariate observations, In 5-th Berkeley Symposium on Mathematical Statistics and Probability, p.281297, 1967.

J. Hartigan and M. Wong, Algorithm AS 136: A K-Means Clustering Algorithm, Applied Statistics, vol.28, issue.1
DOI : 10.2307/2346830

L. Wasserman, All of Statistics -A Concise Course in Statistical Inference, 2004.

G. Schwarz, Estimating the Dimension of a Model, The Annals of Statistics, vol.6, issue.2, p.461464, 1978.
DOI : 10.1214/aos/1176344136

R. Lebret, S. Iovle, F. Langrognet, C. Biernacki, G. Celeux et al., Rmixmod : The R Package of the Model-Based Unsupervised, Supervised and Semi-Supervised Classication Mixmod Library, Journal of Statistical Software, issue.6, p.67241270, 2015.

L. Breiman, Random Forests, Machine Learning, vol.45, issue.1, p.532, 2001.

M. Kuhn, Building Predictive Models in R Using the caret Package, Journal of Statistical Software, 2008.

T. Hastie, R. Tibshirani, and J. Friedman, Elements of Statistical Learning : data mining, inference, and prediction, 2009.

R. Genuer, Forêts aléatoires : aspects théoriques, sélection de variables et applications, 2010.

A. Liaw and M. Wiener, Classication and regression by randomForest, p.1822, 2002.

G. Louppe, Understanding Random Forests : From Theory to Practice, 2014.

L. Breiman, Manual on setting up, using, and understanding random forests v3

R. Iler, The Chemistry of Silica : Solubility, Polymerization, Colloid and Surface Properties and Biochemistry of Silica, 1979.

V. and L. Saux, Fatigue et vieillissement des élastomères en environnements marin et thermique : de la caractérisation accélérée au calcul de structures, 2010.

F. Coeuille, Revêtements polymères de canalisation de uide : caractérisation et évolution de l'adhesion en milieu agressif, 2002.

M. Shanahan and Y. Auriac, Water absorption and leaching eects in cellulose diacetate, Polymer, vol.39, issue.5, p.11551164, 1998.

M. Shanahan, B. De-'neve, and Y. Auriac, Eects de l'hydrolyse sur la masse d'un polymère réticulé. Comptes rendus de l'Académie des sciences, p.317763767, 1993.

I. Masquelier, Inuence de la formulation sur les propriétés en fatigue d'élastomères industriels, 2014.

Y. Ren, S. Zhao, Q. Yao, Q. Li, X. Zhang et al., Eects of plasticizers on the strain-induced crystallization and mechanical properties of natural rubber and synthetic polyisoprene, RSC Advances, vol.5, issue.15, p.1131711324, 2015.

Y. Ren, S. Zhao, Q. Li, X. Zhang, and L. Zhang, Inuence of liquid isoprene on rheological behavior and mechanical properties of polyisoprene rubber, Journal of Applied Polymer Science, issue.8, p.132, 2015.

E. Richaud, I. Derue, P. Gilormini, J. Verdu, C. Vaulot et al., Plasticizer eect on network structure and hydrolytic degradation, European Polymer Journal, vol.69, p.232246, 2015.

J. Jeczalik, Action of hydrocarbon and ester plasticizer in urethane elastomer for sealing purposes, Journal of Applied Polymer Science, vol.42, issue.3, p.523529, 2001.
DOI : 10.1002/app.1982.070270607

S. Martelli, G. Moore, S. Silva-paes, C. Gandolfo, and J. Laurindo, Inuence of plasticizers on the water sorption isotherms and water vapor permeability of chicken feather keratin lms. LWT -Food Science and Technology, p.292301, 2006.

O. Okamba-diogo, E. Richaud, J. Verdu, F. Fernagut, J. Guilment et al., Molecular and macromolecular structure changes in polyamide 11 during thermal oxidation, Polymer Degradation and Stability, vol.108, p.123132, 2014.
DOI : 10.1016/j.polymdegradstab.2014.05.028
URL : https://hal.archives-ouvertes.fr/hal-01174700

E. Richaud, P. Gac, and J. Verdu, Thermooxidative aging of polydicyclopentadiene in glassy state, Polymer Degradation and Stability, vol.102, p.95104, 2014.
DOI : 10.1016/j.polymdegradstab.2014.01.036
URL : https://hal.archives-ouvertes.fr/hal-00977089

B. Huneau, STRAIN-INDUCED CRYSTALLIZATION OF NATURAL RUBBER: A REVIEW OF X-RAY DIFFRACTION INVESTIGATIONS, Rubber Chemistry and Technology, vol.84, issue.3, p.425452, 2011.
DOI : 10.5254/1.3601131
URL : https://hal.archives-ouvertes.fr/hal-01007326

R. Robinson, The vapour pressure and osmotic equivalence of sea water, Journal of the Marine Biological Association of the United Kingdom, vol.56, issue.02, 1954.
DOI : 10.1017/S0025315400008468

R. Petiaud and Q. Pham, Polychloroprene. I. Etude de la microstructure par RMN 1H, Journal of Polymer Science: Polymer Chemistry Edition, vol.23, issue.5, 1985.
DOI : 10.1002/pol.1985.170230507

R. Ferguson, Infrared and nuclear magnetic resonance studies of the microstructures of polychloroprenes, Journal of Polymer Science Part A : General Papers, vol.2, issue.11, p.47354741, 1964.

M. Fontanille and Y. Gnanou, Chimie et physico-chimie des polymères, 2014.

M. Zinet, Modélisation de la cristallisation des polymères dans les procédés de plasturgie : quantication des eets thermiques et rhéoologiques, 2011.

M. Arhant, Composites thermoplastiques pour enceintes sous-marines, Ecole Centrale Nantes, 2016.
URL : https://hal.archives-ouvertes.fr/tel-01668495

P. Flory, Principles of Polymer Chemistry, 1953.

G. Kraus, Swelling of ller-reinforced vulcanizates, Journal of Applied Polymer Science, vol.7, issue.3, p.861871, 1963.

H. Desai, K. Hendrikse, and C. Woolard, Vulcanization of polychloroprene rubber. I. A revised cationic mechanism for ZnO crosslinking, Journal of Applied Polymer Science, vol.6, issue.2, p.865876, 2007.
DOI : 10.5254/1.3535754

Y. Miyata and M. Atsumi, Zinc Oxide Crosslinking Reaction of Polychloroprene Rubber, Rubber Chemistry and Technology, vol.62, issue.1, p.112, 1989.
DOI : 10.5254/1.3536232

A. Thomas and K. Muniandy, Absorption and desorption of water in rubbers, Polymer, vol.28, issue.3, p.408415, 1987.
DOI : 10.1016/0032-3861(87)90193-5

P. Cognard, Colles et adhésifs, caractérisques et types, 2001.

T. Chapman, Models for polyurethane hydrolysis under moderately acidic conditions: A comparative study of hydrolysis rates of urethanes, ureas, and amides, Journal of Polymer Science Part A: Polymer Chemistry, vol.27, issue.6, 1989.
DOI : 10.1002/pola.1989.080270620

P. Gac, D. Choqueuse, D. Melot, B. Melve, and L. Meniconi, Life time prediction of polymer used as thermal insulation in oshore oil production conditions : Ageing on real structure and reliability of prediction, Polymer Testing, p.34168174, 2014.

P. Gac, D. Choqueuse, and D. Melot, Description and modeling of polyurethane hydrolysis used as thermal insulation in oil oshore conditions, Polymer Testing, vol.32, issue.8, p.15881593, 2013.