Structural adhesives: chemistry and technology, 2012. ,
DOI : 10.1007/978-1-4684-7781-8
Adhesives Technology Handbook, Journal of Engineering Materials and Technology, vol.109, issue.1, 2008. ,
DOI : 10.1115/1.3225943
Araldite adhesives core range -selector guide for industrial bonding, 2012. ,
Advances in structural adhesive bonding, 2010. ,
DOI : 10.1533/9781845698058
The Wetting of Leaf Surfaces and Its Ecological Significances, Wetting and Wettability. InTech, 2015. ,
DOI : 10.5772/61205
Fracture toughness of bulk adhesives in mode I and mode III and curing effect, International Journal of Fracture, vol.75, issue.2, pp.221-234, 2011. ,
DOI : 10.1007/978-94-015-7764-9
Influence of adhesive bond line thickness on joint strength, International Journal of Adhesion and Adhesives, vol.29, issue.7, pp.29724-736, 2009. ,
DOI : 10.1016/j.ijadhadh.2009.03.002
URL : https://hal.archives-ouvertes.fr/hal-00494459
Analyse de l'e?et du vieillissement en milieu humide sur le comportement mécanique d'adhésifs en assemblages sous sollicitations multi-axiales ,
A modified creep model of epoxy adhesive at ambient temperature, International Journal of Adhesion and Adhesives, vol.29, issue.4, pp.396-404 ,
DOI : 10.1016/j.ijadhadh.2008.07.010
Material modelling for rate-dependent adhesives, International Journal of Adhesion and Adhesives, vol.21, issue.3, pp.197-210 ,
DOI : 10.1016/S0143-7496(00)00051-8
A coupled analysis of mechanical behaviour and ageing for polymer-matrix composites, Composites Science and Technology, vol.62, issue.4, pp.543-549, 2002. ,
Characterization and modelling of the 3d elastic?plastic behaviour of an adhesively bonded 181 ,
Prediction of long term strength of adhesively bonded steel/epoxy joints in sea water, International Journal of Adhesion and Adhesives, vol.29, issue.6, pp.29595-608 ,
DOI : 10.1016/j.ijadhadh.2009.02.013
URL : https://hal.archives-ouvertes.fr/hal-00392148
Development of physical and mechanical properties of a cold-curing structural adhesive in a wet bridge environment, Construction and Building Materials, vol.144, pp.115-124, 2017. ,
DOI : 10.1016/j.conbuildmat.2017.03.145
Characterization of seawater and weather aged polyurethane elastomer for bend stiffeners, Polymer Testing, vol.59, pp.290-295, 2017. ,
DOI : 10.1016/j.polymertesting.2017.02.012
E?ect of water and mechanical stress on durability, Handbook of adhesion technology, pp.787-822, 2011. ,
Moisture absorption???desorption effects in adhesive joints, International Journal of Adhesion and Adhesives, vol.29, issue.8, pp.751-760, 2009. ,
DOI : 10.1016/j.ijadhadh.2009.05.001
Measurement of adhesive joint fracture properties as a function of environmental degradation, International Journal of Adhesion and Adhesives, vol.18, issue.4, pp.237-246, 1998. ,
DOI : 10.1016/S0143-7496(98)00028-1
Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: Adhesives, adhesion theories and surface pretreatment, Journal of Materials Science, vol.39, issue.1, pp.1-49, 2004. ,
DOI : 10.1023/B:JMSC.0000007726.58758.e4
Analyse de l'e?et du vieillissement en milieu humide sur le comportement mécanique d'adhésifs en assemblages sous sollicitations multiaxiales, 2014. ,
Predicting the residual strength for environmentally degraded adhesive lap joints, International Journal of Adhesion and Adhesives, vol.26, issue.5, pp.325-336, 2006. ,
DOI : 10.1016/j.ijadhadh.2005.04.003
Characterization and modeling of multi-material assemblies under mixed quasi-static loadings for the design of automotive structures. Theses, 2016. ,
URL : https://hal.archives-ouvertes.fr/tel-01453047
Adhesive bonding: science, technology and applications, 2005. ,
DOI : 10.1533/9781845690755
New evidence of adhesive as hafting material on middle and upper palaeolithic artefacts from gura cheii-râ¸râ¸snov cave (romania), Journal of Archaeological Science, issue.7, pp.391942-1950, 2012. ,
Le collage: un moyen ancestral, moderne et durable d'assemblage, 2004. ,
Ancient Egyptian materials and industries, Courier Corporation, 2012. ,
Engineering in the ancient world, 2000. ,
Aircraft and automobile materials of construction Non-ferrous and organic materials: a treatise for aircraft, automobile, and mechanical engineers, manufacturers, constructors, designers, draughtsmen, students, and others, 1921. ,
On Adhesives and Adhesive Action, The Journal of Physical Chemistry, vol.29, issue.2, pp.188-204, 1925. ,
DOI : 10.1021/j150248a008
Some reflections on contemporary views of theories of adhesion, International Journal of Adhesion and Adhesives, vol.13, issue.2, pp.67-72, 1993. ,
DOI : 10.1016/0143-7496(93)90015-2
An Essay on the Cohesion of Fluids, Philosophical Transactions of the Royal Society of London, vol.95, issue.0, pp.65-87 ,
DOI : 10.1098/rstl.1805.0005
The collected work, pp.54-371, 1931. ,
Shape of a liquid surface in contact with a solid, European Journal of Physics, vol.11, issue.2, p.125, 1990. ,
DOI : 10.1088/0143-0807/11/2/012
The computation of surface tension and of contact angle by the sessile-drop method, Journal of Colloid Science, vol.17, issue.5, pp.439-447, 1962. ,
DOI : 10.1016/0095-8522(62)90055-7
An Investigation of the Cling of Thin Polymeric Films, The Journal of Adhesion, vol.43, issue.5, pp.285-307, 1997. ,
DOI : 10.1007/BF00018123
The role of diffusion phenomena in polymer-to-polymer adhesion, Journal of Applied Polymer Science, vol.7, issue.2, pp.475-491, 1963. ,
DOI : 10.1002/app.1963.070070207
CAUSES OF POOR ADHESION: WEAK BOUNDARY LAYERS, Industrial & Engineering Chemistry, vol.59, issue.9, 1967. ,
DOI : 10.1021/ie51403a010
Strategies for the replacement of chromic acid anodising for the structural bonding of aluminium alloys, International Journal of Adhesion and Adhesives, vol.26, issue.6, pp.419-453, 2006. ,
DOI : 10.1016/j.ijadhadh.2005.07.001
Design of adhesive joints under humid conditions, 2013. ,
DOI : 10.1007/978-3-642-37614-6
Durability of structural adhesive bonded aluminum joints, Adhesives Age, vol.21, issue.3, pp.17-23, 1978. ,
Handbook of adhesion technology, 2011. ,
Manufacture of adhesive joints and bulk specimens with high-temperature adhesives, International Journal of Adhesion and Adhesives, vol.24, issue.1, pp.69-83, 2004. ,
DOI : 10.1016/S0143-7496(03)00101-5
An effective stress/strain concept in the mechanical characterization of structural adhesive bonding, International Journal of Adhesion and Adhesives, vol.1, issue.3, pp.135-140, 1981. ,
DOI : 10.1016/0143-7496(81)90036-1
Standard test method for shear properties of composite materials by the V-notched beam method, 2005. ,
Sem fractography of pure and mixed-mode interlaminar fractures in graphite/epoxy composites In Fractography of Modern Engineering Materials: Composites and Metals [52] R. El-Hajjar and R. Haj-Ali. In-plane shear testing of thick-section pultruded frp composites using a modified arcan fixture, Composites Part B: Engineering, vol.35, issue.5, pp.421-428, 1987. ,
Measurement of the mechanical properties of structural adhesives in tension and shear over a wide range of temperatures, Journal of Adhesion Science and Technology, vol.19, issue.2, pp.109-141, 2005. ,
Mechanical properties of adhesives in situ and in bulk, International Journal of Adhesion and Adhesives, vol.14, issue.1, pp.31-37, 1994. ,
DOI : 10.1016/0143-7496(94)90018-3
Technologie du collage structural pour les applications en mécanique, Publications CETIM, 1993. ,
Influence of adhesive thickness on the behaviour of bonded assemblies under shear loadings using a modified TAST fixture, International Journal of Adhesion and Adhesives, vol.30, issue.5, pp.257-266, 2010. ,
DOI : 10.1016/j.ijadhadh.2009.11.003
URL : https://hal.archives-ouvertes.fr/hal-00489162
Stress analysis concepts for adhesive bonding of aircraft primary structure. In Adhesively bonded joints: Testing, analysis, and design, 1988. ,
Analyse et modélisation du comportement non-linéaire d'assemblages collés pour application marine, 2008. ,
Development of an improved adhesive test method for composite assembly design, Composites Science and Technology, vol.65, issue.3-4, pp.359-368, 2005. ,
DOI : 10.1016/j.compscitech.2004.09.008
Development of an improved adhesive test method for composite assembly design, Composites Science and Technology, vol.65, issue.3-4, pp.359-368, 2005. ,
DOI : 10.1016/j.compscitech.2004.09.008
Numerical analysis of edge effects in adhesively-bonded assemblies application to the determination of the adhesive behaviour, Computers & Structures, vol.86, issue.17-18, pp.1704-1717, 2008. ,
DOI : 10.1016/j.compstruc.2008.02.003
URL : https://hal.archives-ouvertes.fr/hal-00449158
Experimental analysis of the behavior of adhesively bonded joints under tensile/compression???shear cyclic loadings, International Journal of Adhesion and Adhesives, vol.44, pp.15-25, 2013. ,
DOI : 10.1016/j.ijadhadh.2013.01.011
URL : https://hal.archives-ouvertes.fr/hal-00825563
A prediction method of the cyclic behavior of adhesively bonded structures under fatigue loading, 10th European Adhesion Conference, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01084795
Analysis of the Influence of Geometric Parameters on the Stress Distributions in Adhesively Bonded Scarf Joints Using 2D Models Under Elastic Assumption, The Journal of Adhesion, vol.11, issue.11, pp.90877-898, 2014. ,
DOI : 10.1080/01694243.2012.701528
URL : https://hal.archives-ouvertes.fr/hal-01001824
Three-dimensional FEM stress analysis and strength prediction of scarf adhesive joints with similar adherends subjected to static tensile loadings, International Journal of Adhesion and Adhesives, vol.54, pp.40-50, 2014. ,
DOI : 10.1016/j.ijadhadh.2014.05.006
3D models of specimens with a scarf joint to test the adhesive and cohesive multi-axial behavior of adhesives, International Journal of Adhesion and Adhesives, vol.62, pp.154-164 ,
DOI : 10.1016/j.ijadhadh.2015.07.005
Handbook of adhesion technology, 2011. ,
Experimental and numerical investigation of balanced boron/epoxy single lap joints subjected to salt spray aging, International Journal of Adhesion and Adhesives, vol.68, pp.9-18, 2016. ,
Analysis of the nonlinear behavior of adhesives in bonded assemblies???Comparison of TAST and Arcan tests, International Journal of Adhesion and Adhesives, vol.28, issue.8, pp.393-404, 2008. ,
DOI : 10.1016/j.ijadhadh.2008.04.006
Modeling of adhesively bonded joints, 2008. ,
DOI : 10.1007/978-3-540-79056-3
Experimental and computational investigations on strain rate sensitivity and deformation behavior of bulk materials made of epoxy resin structural adhesive, International Journal of Solids and Structures, vol.47, issue.2, pp.175-185 ,
DOI : 10.1016/j.ijsolstr.2009.09.026
An Assessment of the Impact Performance of Bonded Joints for Use in High Energy Absorbing Structures, Proceedings of the Institution of Mechanical Engineers, pp.121-131, 1985. ,
DOI : 10.1243/03093247V124317
Manufacture of adhesive joints and bulk specimens with high-temperature adhesives, International Journal of Adhesion and Adhesives, vol.24, issue.1, pp.69-83, 2004. ,
DOI : 10.1016/S0143-7496(03)00101-5
Unified constitutive model for thermoset adhesive, FM73, International Journal of Adhesion and Adhesives, vol.15, issue.3, pp.131-136 ,
DOI : 10.1016/0143-7496(95)91623-E
Modelling and predicting the effects of test speed on the strength of joints made with FM73 adhesive, International Journal of Adhesion and Adhesives, vol.15, issue.1, pp.21-27 ,
DOI : 10.1016/0143-7496(95)93639-3
Characterization and modelling of the viscous behaviour of adhesives using the modified Arcan device, Journal of Adhesion Science and Technology, vol.5, issue.5, pp.443-461, 2015. ,
DOI : 10.1137/S1052623496303470
URL : https://hal.archives-ouvertes.fr/hal-01108263
Simulation of strength difference in elasto-plasticity for adhesive materials, International Journal for Numerical Methods in Engineering, vol.2, issue.10, pp.1461-1477, 2005. ,
DOI : 10.1002/nme.1315
Implementation, identification and validation of an elasto-plastic-damage model for the finite element simulation of structural bonded joints, International Journal of Adhesion and Adhesives, vol.50 ,
DOI : 10.1016/j.ijadhadh.2014.01.020
Nonlinear analysis of adhesively bonded lap joints considering viscoplasticity in adhesives, Computers & Structures, vol.70, issue.4, pp.387-413, 1999. ,
DOI : 10.1016/S0045-7949(98)00168-0
Numerical modelling of lap joints bonded with a rate-dependent adhesive, International Journal of Adhesion and Adhesives, vol.24, issue.4, pp.355-366, 2004. ,
DOI : 10.1016/j.ijadhadh.2003.11.006
Theory of Viscoelasticity, Journal of Applied Mechanics, vol.38, issue.3, 2012. ,
DOI : 10.1115/1.3408900
Fluidity and plasticity, 1922. ,
Nonlinear Viscoelastic Characterization of FM???73 Adhesive, Journal of Rheology, vol.26, issue.3, pp.245-261, 1982. ,
DOI : 10.1122/1.549666
Time Dependent Behavior of Laminated Composites at Elevated Temperatures, Journal of Composite Materials, vol.23, issue.11, pp.1159-1197, 1989. ,
DOI : 10.1137/0111030
A non-linear uniaxial integral constitutive equation incorporating rate effects, creep and relaxation, International Journal of Non-Linear Mechanics, vol.14, issue.3, pp.183-203, 1979. ,
DOI : 10.1016/0020-7462(79)90035-0
Constitutive Equations for Elastic-Viscoplastic Strain-Hardening Materials, Journal of Applied Mechanics, vol.42, issue.2, pp.385-389, 1975. ,
DOI : 10.1115/1.3423586
3D models of specimens with a scarf joint to test the adhesive and cohesive multi-axial behavior of adhesives, International Journal of Adhesion and Adhesives, vol.62, pp.154-164, 2015. ,
DOI : 10.1016/j.ijadhadh.2015.07.005
A tension/compression???torsion test suited to analyze the mechanical behaviour of adhesives under non-proportional loadings, International Journal of Adhesion and Adhesives, vol.53, pp.3-14, 2014. ,
DOI : 10.1016/j.ijadhadh.2014.01.013
URL : https://hal.archives-ouvertes.fr/hal-01060000
Etudes théorique et expérimentale du comportement de matériaux composites en contraintes planes, 1992. ,
On the characterization of nonlinear viscoelastic materials, Polymer Engineering and Science, vol.9, issue.4, pp.295-310, 1969. ,
DOI : 10.6028/jres.069A.058
Prévision de la durée de vie et performances résiduelles des composites carbone/résine, pp.6612-6632, 2000. ,
Characterization and modeling of multi-material assemblies under mixed quasi-static loadings for the design of automotive structures, 2016. ,
URL : https://hal.archives-ouvertes.fr/tel-01453047
Analysis of the Influence of Hydrostatic Stress on the Behaviour of an Adhesive in a Bonded Assembly, Journal of Adhesion Science and Technology, vol.948, issue.11-12, pp.241977-1994, 2010. ,
DOI : 10.1163/156856109X432956
Pressure-Dependent Plasticity for Structural Adhesive Constitutive Modeling, Journal of Adhesion Science and Technology, vol.20, issue.11-12, pp.11-121995, 2010. ,
DOI : 10.1016/j.ijplas.2003.12.008
Analysis of the cyclic behavior of an adhesive in an assembly for o?shore windmills applications, 2014. ,
Measurements and models for design with modern adhesives, International Journal of Adhesion and Adhesives, vol.23, issue.2, pp.141-149, 2003. ,
DOI : 10.1016/S0143-7496(03)00006-X
Plastic yielding of a film adhesive under multiaxial stresses, International Journal of Adhesion and Adhesives, vol.20, issue.2, pp.155-164, 2000. ,
DOI : 10.1016/S0143-7496(99)00033-0
Project paj2 report no 7 an evaluation of yield criteria for adhesives for finite element ,
Invariant based transversely-isotropic material and failure model for fiber-reinforced polymers, Computers, Materials, & Continua, vol.16, issue.1, pp.25-50, 2010. ,
Characterization and modeling of the 3d elastic-plastic behavior of structural adhesive films for aeronautical applications, 2012. ,
The phenomena of rupture and flow in solids. Philosophical transactions of the royal society of london. Series A, containing papers of a mathematical or physical character, pp.163-198, 1921. ,
Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, vol.8, issue.2, pp.100-104, 1960. ,
DOI : 10.1016/0022-5096(60)90013-2
Damage and crack growth analysis of the double cantilever beam specimen, International Journal of Fracture, vol.54, issue.1, pp.13-18, 1988. ,
DOI : 10.1007/BF00017826
Strength prediction of bonded assemblies using a coupled criterion under elastic assumptions: Effect of material and geometrical parameters, International Journal of Adhesion and Adhesives, vol.47, pp.73-82, 2013. ,
DOI : 10.1016/j.ijadhadh.2013.09.044
URL : https://hal.archives-ouvertes.fr/hal-01563061
Comparison between models based on a coupled criterion for the prediction of the failure of adhesively bonded joints, Engineering Fracture Mechanics, vol.138, pp.185-201, 2015. ,
DOI : 10.1016/j.engfracmech.2015.03.004
Design of adhesive joints under humid conditions -Di?usion of water in adhesives, 2013. ,
The influence of water on the fracture envelope of an adhesive joint, Theoretical and Applied Fracture Mechanics, pp.1-15, 2017. ,
DOI : 10.1016/j.tafmec.2017.01.001
Micro-scale modeling of water diffusion in adhesive composite joints, Composite Structures, vol.111, pp.340-348, 2014. ,
DOI : 10.1016/j.compstruct.2014.01.009
On liquid diffusion, Journal of Membrane Science, vol.100, issue.1, pp.33-38, 1995. ,
DOI : 10.1016/0376-7388(94)00230-V
Di?usion in polymers, p.189, 1968. ,
Di?usion in polymer-diluent systems. Fortschritte Der Hochpolymeren - Forschung, pp.1-47, 1961. ,
Dual stage modeling of moisture absorption and desorption in epoxy mold compounds, Microelectronics Reliability, vol.52, issue.7, pp.1401-1408, 2012. ,
DOI : 10.1016/j.microrel.2012.03.008
Effects of moisture on the long-term performance of adhesively bonded FRP/steel joints used in bridges, Composites Part B: Engineering, vol.92, pp.447-462, 2016. ,
DOI : 10.1016/j.compositesb.2016.02.021
Etude du vieillissement de liaisons adhésives en milieu marin pour application o?shore, 2009. ,
Langmuir-Type Model for Anomalous Moisture Diffusion In Composite Resins, Journal of Composite Materials, vol.12, issue.2, pp.118-131, 1978. ,
DOI : 10.1177/002199837601000408
Free/bound water absorption in an epoxy adhesive, Polymer, vol.46, issue.24, pp.4610733-10740, 2005. ,
DOI : 10.1016/j.polymer.2005.09.008
URL : https://hal.archives-ouvertes.fr/hal-00157171
The interaction of water with an epoxide adhesive based on the diglycidylether of bisphenol-A and triethylene tetramine, International Journal of Adhesion and Adhesives, vol.3, issue.4, pp.189-192, 1983. ,
DOI : 10.1016/0143-7496(83)90092-1
Effect of hygrothermal aging history on sorption process, swelling, and glass transition temperature in a particle-filled epoxy-based adhesive, Journal of Applied Polymer Science, vol.50, issue.8, pp.1581-1591, 2002. ,
DOI : 10.1002/pol.1961.1205015421
The effect of humidity on the durability of aluminium-epoxide joints, International Journal of Adhesion and Adhesives, vol.10, issue.4, pp.247-253, 1990. ,
DOI : 10.1016/0143-7496(90)90042-V
Water diffusion and swelling stresses in highly crosslinked epoxy matrices, Polymer Degradation and Stability, vol.133, pp.255-263, 2016. ,
DOI : 10.1016/j.polymdegradstab.2016.09.004
Action de l'eau sur les plastiques, 2000. ,
Viscosity and glass temperature relations for polymer-diluent systems, Journal of Polymer Science, vol.50, issue.154, pp.549-556, 1961. ,
DOI : 10.1002/pol.1961.1205015421
On a General Relation Involving the Glass Temperature and Coefficients of Expansion of Polymers, The Journal of Chemical Physics, vol.37, issue.5, pp.1003-1007, 1962. ,
DOI : 10.1021/j100837a022
The reversible plasticization of the aromatic copolyester of poly (ethylene terephthalate) and 60 mol% 190 ,
Modelling anomalous moisture uptake, swelling and thermal characteristics of a rubber toughened epoxy adhesive, International Journal of Adhesion and Adhesives, vol.25, issue.1, pp.1-12, 2005. ,
DOI : 10.1016/j.ijadhadh.2004.02.002
Thermal expansion and swelling of cured epoxy resin used in graphite/epoxy composite materials, Journal of Materials Science, vol.98, issue.2, pp.1736-1745, 1980. ,
DOI : 10.1115/1.3443342
Moisture absorption characteristics of rubber particulate filled epoxy adhesives, Journal of Materials Science, vol.22, issue.5, pp.1653-1659, 1989. ,
DOI : 10.1007/BF01105687
Design of adhesive joints under humid conditions -Influences of Water on the Adhesive Properties, 2013. ,
Effects of aging in dry environment on physical and mechanical properties of a cold-curing structural epoxy adhesive for bridge construction, Construction and Building Materials, vol.140, pp.552-561, 2017. ,
DOI : 10.1016/j.conbuildmat.2017.02.063
Experimental and numerical investigation of the static response of environmentally aged adhesively bonded joints, International Journal of Adhesion and Adhesives, vol.40, pp.224-237, 2013. ,
DOI : 10.1016/j.ijadhadh.2012.08.007
A study of the impact of humid aging on the strength of industrial adhesive joints, International Journal of Adhesion and Adhesives, vol.44, pp.66-77, 2013. ,
DOI : 10.1016/j.ijadhadh.2013.02.001
A Comparison of Laboratory-conditioned and Naturally-weathered Bonded Joints, The Journal of Adhesion, vol.2, issue.2, pp.175-201, 2001. ,
DOI : 10.1016/0143-7496(87)90025-X
Durability of structural adhesives. introduction., aj kinloch, 1983. ,
Vieillissement d'assemblages collés acier/composite dans l'eau et sous charge, 1997. ,
The durability of adhesive joints in the presence of water, International Journal of Adhesion and Adhesives, vol.16, issue.2, pp.73-79, 1996. ,
DOI : 10.1016/0143-7496(96)00001-2
The Correlation of Non-Destructive Measurements and Toughness Changes in Adhesive Joints during Environmental Attack, The Journal of Adhesion, vol.11, issue.2, pp.125-161, 2001. ,
DOI : 10.1080/00218469908009557
Coupled stress-diffusion analysis for durability study in adhesively bonded joints, International Journal of Adhesion and Adhesives, vol.22, issue.1, pp.61-73, 2002. ,
DOI : 10.1016/S0143-7496(01)00037-9
Durabilité des assemblages collés: Développement d'un modèle mécanique prédictif avec prise en compte des caractéristiques physico-chimiques de l'adhésif, Ecole nationale des ponts et chaussées (France), 0191. ,
Environmental failure of structural adhesive joints. The journal of adhesion, pp.315-330, 1974. ,
Durabilité en milieu humide d'assemblages structuraux collés type aluminium/composite, 2005. ,
Durability modelling concepts and tools for the cohesive environmental degradation of bonded structures, International Journal of Adhesion and Adhesives, vol.17, issue.3, pp.229-238, 1997. ,
DOI : 10.1016/S0143-7496(97)00008-0
Continuum damage modelling of environmental degradation in joints bonded with EA9321 epoxy adhesive, International Journal of Adhesion and Adhesives, vol.28, issue.6, pp.302-313, 2008. ,
DOI : 10.1016/j.ijadhadh.2007.08.005
On Modelling the Non-linear Behaviour of Thin Adhesive Films in Bonded Assemblies With Interface Elements, Journal of Adhesion Science and Technology, vol.22, issue.13, pp.1541-1563, 2008. ,
DOI : 10.1016/0749-6419(89)90011-9
A modified Arcan test to analyze the behavior of composites and their assemblies under out-of-plane loadings, Composites Part A: Applied Science and Manufacturing, vol.42, issue.1, pp.111-121, 2011. ,
DOI : 10.1016/j.compositesa.2010.10.012
Numerical analysis of edge effects in adhesively-bonded assemblies application to the determination of the adhesive behaviour, Computers & Structures, vol.86, issue.17-18, pp.1704-1717, 2008. ,
DOI : 10.1016/j.compstruc.2008.02.003
URL : https://hal.archives-ouvertes.fr/hal-00449158
Convergence Properties of the Nelder--Mead Simplex Method in Low Dimensions, SIAM Journal on Optimization, vol.9, issue.1, pp.112-147, 1998. ,
DOI : 10.1137/S1052623496303470
Micromechanical-based hybrid mesoscopic 3D approach for non-linear progressive failure analysis of composite structures, Journal of Composite Materials, vol.4, issue.19-20, pp.19-202389, 2012. ,
DOI : 10.1177/002199839703100805
Marin industry, Handbook of adhesion technology, pp.1237-1262, 2011. ,
Study of the water absorption and its influence on the Young's modulus in a commercial polyamide, Polymer Testing, vol.32, issue.1, pp.158-164, 2013. ,
DOI : 10.1016/j.polymertesting.2012.10.003
Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy, Polymer, vol.40, issue.20, pp.5505-5512, 1999. ,
DOI : 10.1016/S0032-3861(98)00790-3
Hygrothermal effects of epoxy resin. Part II: variations of glass transition temperature, Polymer, vol.40, issue.20, pp.5513-5522, 1999. ,
DOI : 10.1016/S0032-3861(98)00791-5
E?ects of humidity on an epoxy adhesive, International Journal of Adhesion and Adhesives, vol.12, issue.3, pp.191-196, 1992. ,
A Review of Adhesive Bonding for O?shore Structures. Health and Safety Executive, 1997. ,
Prediction of long term strength of adhesively bonded steel/epoxy joints in sea water, International Journal of Adhesion and Adhesives, vol.29, issue.6, pp.595-608, 2009. ,
DOI : 10.1016/j.ijadhadh.2009.02.013
URL : https://hal.archives-ouvertes.fr/hal-00392148
The durability of some epoxide adhesive-bonded joints on exposure to moist warm air, International Journal of Adhesion and Adhesives, vol.1, issue.1, pp.35-39, 1980. ,
DOI : 10.1016/0143-7496(80)90032-9
Diffusion of water into an epoxy adhesive: comparison between bulk behaviour and adhesive joints, International Journal of Adhesion and Adhesives, vol.15, issue.3, pp.137-142, 1995. ,
DOI : 10.1016/0143-7496(95)91624-F
A Model for Predicting Joint Durability, The Journal of Adhesion, vol.6, issue.3, pp.3-15, 1980. ,
DOI : 10.1002/app.1977.070210907
Modelling the environmental degradation of adhesively bonded aluminium and composite joints using a CZM approach, International Journal of Adhesion and Adhesives, vol.27, issue.6, pp.505-518, 2007. ,
DOI : 10.1016/j.ijadhadh.2006.09.015
Kinetics and mechanism of environmental attak, Durability of structural adhesives, pp.85-131, 1983. ,
Characterisation of moisture-dependent cohesive zone properties for adhesively bonded joints, Engineering Fracture Mechanics, vol.77, issue.16, pp.773105-3119, 2010. ,
DOI : 10.1016/j.engfracmech.2010.08.023
Simulation of strength difference in elasto-plasticity for adhesive materials, International Journal for Numerical Methods in Engineering, vol.2, issue.10, pp.1461-1477, 2005. ,
DOI : 10.1002/nme.1315
A review on the temperature and moisture degradation of adhesive joints, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, pp.488-501, 2017. ,
DOI : 10.1163/156856196X00436
Behaviour of environmentally degraded epoxy adhesives as a function of temperature, The Journal of Adhesion, vol.229, issue.1-2, pp.95-112, 2017. ,
DOI : 10.1016/j.polymer.2005.10.002
Description and modeling of polyurethane hydrolysis used as thermal insulation in oil offshore conditions, Polymer Testing, vol.32, issue.8, pp.1588-1593, 2013. ,
DOI : 10.1016/j.polymertesting.2013.10.009
Water sorption characteristics in moderately hydrophilic polymers, Part 1: Effect of polar groups concentration and temperature in water sorption in aromatic polysulfones, Journal of Applied Polymer Science, vol.61, issue.5, pp.3279-3285, 2008. ,
DOI : 10.1002/polc.5070160109
Water clustering in polychloroprene, Polymer, issue.12, pp.552861-2866, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01058318
Osmotic effects in water absorption by polymers, Polymer, vol.21, issue.2, pp.207-212, 1980. ,
DOI : 10.1016/0032-3861(80)90062-2
Vieillissement physique des matériaux polymères, 2005. ,
Ageing and yielding in model epoxy thermosets, Polymer, vol.40, issue.5, pp.1209-1218, 1999. ,
DOI : 10.1016/S0032-3861(98)00343-7