K. Otsuka and C. Wayman, Shape Memory Materials, 1999.

D. Celik, T. Tasdemir, and K. Er, Comparative Study of Six Rotary Nickel-Titanium Systems and Hand Instrumentation for Root Canal Preparation in Severely Curved Root Canals of Extracted Teeth, J. Endod, vol.39, issue.2, pp.278-282, 2013.

M. Hülsmann, O. A. Peters, and P. M. Dummer, Mechanical Preparation of Root Canals, Shaping Goals, Techniques and Means, Endod. Top, vol.10, pp.30-76, 2005.

B. Sattapan, G. J. Nervo, J. E. Palamara, and H. H. Messer, Defects in Rotary Nickel-Titanium Files After Clinical Use, J. Endod, pp.61-65, 2000.

I. D. and H. Arslan, A Review of Instrumentation Kinematics of Engine-Driven Nickel-Titanium Instruments, Int. Endod. J, vol.49, issue.2, pp.119-135, 2016.

V. Franco, C. Fabiani, S. Tashieri, A. Malentacca, M. Bortolin et al., Investigation on the Shaping Ability of Nickel-Titanium Files When Used with a Reciprocation Motion, J. Endod, vol.37, pp.1398-1401, 2011.

G. Yared, Canal Preparation Using Only One NiTi Rotary Instrument: Preliminary Observations, Int. Endod. J, pp.339-344, 2008.
DOI : 10.1111/j.1365-2591.2007.01351.x

R. Castello-escriva, T. Alegre-domingo, V. Faus-matoses, S. Romanrichon, and V. J. , Faus-Llacer, In vitro Comparison of Cyclic Fatigue Resistance of ProTaper WaveOne, and Twisted Files, J. Endod, vol.38, pp.1521-1524, 2012.

G. Gavini, C. L. Caldeira, E. Akisue, G. T. Candeiro, and D. A. Kawakami, Resistance to Flexural Fatigue of Reciproc R25 Files Under Continuous Rotation and Reciprocating Movement, J. Endod, vol.38, pp.684-687, 2012.

S. Burklein, S. Benten, and E. Schafer, Shaping Ability of Different Single-File Systems in Severely Curved Root Canals of Extracted Teeth, Int. Endod. J, vol.46, pp.590-597, 2013.

A. M. Elnaghy and S. E. Elsaka, Torsion and Bending Properties of OneShape and WaveOne Instruments, J. Endod, issue.4, pp.544-547, 2014.

S. E. Saber, M. M. Nagy, and E. Schafer, Comparative Evaluation of the Shaping Ability of WaveOne, c, Int. Endod. J, vol.48, pp.109-114, 2014.

S. E. Elsaka and A. M. Elnaghy, Cyclic Fatigue Resistance of OneShape and WaveOne Instruments Using Different Angles of Curvature, Dent. Mater. J, vol.34, issue.3, pp.358-363, 2015.

E. Karatas¸, H. Karatas¸karatas¸, M. Arslan, F. Büker, I. D. Seçkin et al., Cyclic Fatigue Resistance and Force Generated by OneShape Instruments during Curved Canal Preparation, Int. Endod. J, vol.49, issue.4, pp.361-364, 2015.

N. Bonessio, E. S. Pereira, G. Lomiento, A. Arias, M. G. Bahia et al., Validated Finite Element Analyses of WaveOne Endodontic Instruments: A Comparison Between M-Wire and NiTi Alloys, vol.48, pp.441-450, 2014.

G. P. Kumar and L. Mathew, Self-expanding aortic valve stent-material optimization, Comput. Biol. Med, vol.42, issue.11, pp.1060-1063, 2012.
DOI : 10.1016/j.compbiomed.2012.08.007

F. Nematzadeh and S. K. Sadrnezhaad, Effects of Crimping on Mechanical Performance of Nitinol Stent Designed for Femoral Artery: Finite Element Analysis, J. Mater. Eng. Perform, p.22, 2013.

M. Kromka-szydek, M. Jedrusik-paw?owska, G. Milewski, Z. Lekston, T. Cies´likcies´lik et al., Numerical Analysis of Displacements of Mandible Bone Parts Using Various Elements for Fixation of Subcondylar Fractures, Acta Bioeng. Biomech, issue.1, pp.11-18, 2010.

E. Berutti, G. Chiandussi, I. Gaviglio, and A. Iba, Comparative Analysis of Torsional and Bending Stresses in Two Mathematical Models of Nickel Titanium Rotary Instruments: Protaper Versus Profile, J. Endod, vol.29, issue.1, pp.15-19, 2003.

Y. L. Turpin, F. Chagneau, O. Bartier, G. Cathelineau, and J. M. Vulcain, Impact of Torsional and Bending Inertia on Root Canal Instruments, J. Endod, issue.5, pp.333-336, 2001.

Y. L. Turpin, F. Chagneau, and J. M. Vulcain, Impact of Two Theoretical Cross-Sections on Torsional and Bending Stresses of Nickel Titanium Root Canal Instrument Models, J. Endod, vol.26, issue.7, pp.414-417, 2000.

X. Xu, M. Eng, Y. Zheng, and D. Eng, Comparative Study of Torsional and Bending Properties for Six Models of Nickel-Titanium Root Canal Instruments with Different Cross-Sections, J. Endod, vol.32, pp.372-375, 2006.

R. Chirani, V. Chevalier, S. Chirani, and S. Calloch, Comparative Analysis of Torsional and Bending Behavior Through Finite-Element Models of Five NiTi Endodontic Instruments, Oral Surg. Oral Med. Oral Pathol, Oral Radiol. Endod, vol.111, issue.1, pp.115-121, 2011.

S. H. Baek, C. J. Lee, A. Versluis, B. M. Kim, W. Lee et al., Comparison of Torsional Stiffness of Nickel-Titanium Rotary Files with Different Geometric Characteristics, J. Endod, vol.37, pp.1283-1286, 2011.

R. He and J. Ni, Design Improvement and Failure Reduction of Endodontic Files Through Finite Element Analysis: Application to VTaper File Designs, J. Endod, issue.9, pp.1552-1557, 2010.

T. O. Kim, G. S. Cheung, J. M. Lee, B. M. Kim, B. Hur et al., Stress Distribution of Three NiTi Rotary Files Under Bending and Torsional Conditions Using a Mathematic Analysis, vol.42, pp.14-21, 2009.

E. W. Zhang, G. S. Cheung, and Y. F. Zheng, Influence of Crosssectional Design and Dimension on Mechanical Behavior of NickelTitanium Instruments Under Torsion and Bending: A Numerical Analysis, J. Endod, issue.8, pp.1394-1398, 2010.

M. I. El-anwar, S. A. Yousief, E. M. Kataia, and T. M. El-wahab, Finite Element Study on Continuous Rotating Versus Reciprocating NickelTitanium Instruments, vol.27, pp.436-441, 2016.

D. Montalvao and F. S. Alcada, Numeric Comparison of the Static Mechanical Behavior Between Profile GT and Profile GT Series X Rotary Nickel-Titanium Files, J. Endod, issue.8, pp.1158-1161, 2011.

L. D. Santos, M. G. Bahia, E. B. De-las, V. T. Casas, and . Buono, Comparison of the Mechanical Behavior Between Controlled Memory and Superelastic Nickel-Titanium Files Via Finite Element Analysis, J. Endod, issue.11, pp.1444-1447, 2013.

L. D. Santos, P. D. Resende, M. G. Bahia, and V. T. Buono, Effects of R-Phase on Mechanical Responses of a Nickel-Titanium Endodontic Instrument: Structural Characterization and Finite Element Analysis, Sci. World J, 2016.

S. Necchi, S. Taschieri, L. Petrini, and F. Migliavacca, Mechanical Behavior of Nickel-Titanium Rotary Endodontic Instruments in Simulated Clinical Conditions: A Computational Study, Int. Endod. J, pp.939-949, 2008.

S. Necchi, L. Petrini, S. Taschieri, and F. Migliavacca, A Comparative Computational Analysis of the Mechanical Behavior of Two NickelTitanium Rotary Endodontic Instruments, J. Endod, issue.8, pp.1380-1384, 2010.

H. C. Kim, H. J. Kim, C. J. Lee, B. M. Kim, J. K. Park et al., Mechanical Response of Nickel-Titanium Instruments with Different Cross-Sectional Designs During Shaping of Simulated Curved Canals, Int. Endod. J, vol.42, pp.593-602, 2009.

H. C. Kim, M. H. Lee, J. Yum, H. J. Kim, A. Versluis et al., Potential Relationship Between Design of Nickel-Titanium Rotary Instruments and Vertical Root Fracture, J. Endod, issue.7, pp.1195-1198, 2010.

M. H. Lee, A. Versluis, B. M. Kim, C. J. Lee, B. Hur et al., Correlation Between Experimental Cyclic Fatigue Resistance and Numerical Stress Analysis for Nickel-Titanium Rotary Files, J. Endod, issue.8, pp.1152-1157, 2011.

V. Legrand, S. Moyne, L. Pino, S. Chirani, S. Calloch et al., Mechanical Behavior of a NiTi Endodontic File During Insertion in an Anatomic Root Canal Using Numerical Simulations, J. Mater. Eng. Perform, p.24, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01285996

L. D. Santos, J. B. Ló-pez, E. B. De-las, M. G. Casas, . De-azevedo et al., Mechanical Behavior of Three NickelTitanium Rotary Files: A Comparison of Numerical Simulation with Bending and Torsion Tests, Mater. Sci. Eng. C Mater. Biol. Appl, vol.37, pp.258-263, 2014.

L. Saint-sulpice, S. Arbab-chirani, and S. Calloch, Thermomechanical Cyclic Behavior Modeling of Cu-AL-Be SMA Materials and Structures, Int. J. Solids Struct, vol.49, issue.9, pp.1088-1102, 2012.

;. L. Cast3m, S. Saint-sulpice, S. Chirani, and . Calloch, A 3D Super-Elastic Model for Shape Memory Alloys Taking into Account Progressive Strain Under Cyclic Loadings, Mech. Mater, vol.41, pp.12-26, 2009.

C. Bouvet, S. Calloch, and C. Lexcellent, A Phenomenological Model for Pseudoelasticity of Shape Memory Alloys Under Multiaxial Proportional and Nonproportional Loadings, Eur. J. Mech. A. Solids, vol.23, pp.37-61, 2004.

K. Taillard, S. Chirani, S. Calloch, and C. Lexcellent, Equivalent Transformation Strain and Its Relation with Martensite Volume Fraction for Isotropic and Anisotropic Shape Memory Alloys, Mech. Mater, vol.40, issue.4-5, pp.151-170, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00263827

, General Requirements and Test Methods, vol.1, pp.3630-3631, 2008.

H. P. Lopes, C. N. Elias, M. V. Vieira, J. F. , M. Siqueira et al., Fatigue Life of Reciproc and Mtwo Instruments Subjected to Static and Dynamic Tests, J. Endod, issue.5, pp.693-696, 2013.

J. Piao, K. Miyara, A. Ebihara, N. Nomura, T. Hanawa et al., Correlation Between Cyclic Fatigue and the Bending Properties of Nickel Titanium Endodontic Instruments, vol.33, pp.539-544, 2014.

H. M. Zhou, Y. Shen, W. Zheng, L. Li, Y. F. Zheng et al., Mechanical Properties of Controlled Memory and Superelastic NickelTitanium Wires Used in the Manufacture of Rotary Endodontic Instruments, J. Endod, vol.38, issue.11, pp.1535-1540, 2012.

F. Auricchio and L. Petrini, A Three-Dimensional Model Describing Stress-Temperature Induced Solid Phase Transformations: Solution Algorithm and Boundary Value Problems, Int. J. Numer. Meth. Eng, pp.807-836, 2004.