J. T. Kang and C. Kim, Impact energy absorption mechanism of largely deformable composites with different reinforcing structures, Fibers and Polymers, vol.1, pp.45-54, 2000.

B. Wattrisse, J. M. Muracciole, and A. Chrysochoos, Thermomechanical effects accompanying the localized necking of semi-crystalline polymers, International Journal of Thermal Science, vol.41, pp.422-427, 2002.

C. Meola and G. M. Carlomagno, Infrared thermography to impact-driven thermal effects, Applied Physics A, vol.96, pp.759-62, 2009.

K. E. Aggelis, D. G. Matikas, and T. E. , Monitoring mechanical damage in structural materials using complimentary NDE techniques based on thermography and acoustic emission, Composites: Part B, vol.43, pp.2676-2686, 2012.

J. P. Noble and J. Harding, Temperature Measurement in the Tensile Hopkinson Bar Test, Measurement Science and Technology, vol.5, pp.1163-1171, 1994.

E. M. Arruda, M. C. Boyce, and R. Jayachandran, Effects of strain rate, temperature and thermomechanical coupling on the finite strain deformation of glassy polymers, Mechanics of Materials, vol.19, pp.193-212, 1995.

C. P. Buckley, J. Harding, J. P. Hou, C. Ruiz, and A. Trojanowski, Deformation of thermosetting resins at impact rates of strain. Part I: experimental study, Journal of Mechanics and Physics of Solids, vol.49, pp.1517-1538, 2001.

M. Garg, A. D. Mulliken, and M. C. Boyce, Temperature rise in polymeric materials during high rate deformation, Journal of Applied Mechanics, vol.75, pp.148-155, 2008.

V. Lerch, G. Gary, and P. Herve, Thermomechanical properties of polycarbonate under dynamic loading, J. De Physique IV, vol.110, pp.159-164, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00111383

Z. Li and J. Lambros, Strain rate effects on the thermomechanical behavior of polymers, International Journal of Solids and Structures, vol.38, pp.3549-3562, 2001.

A. D. Mulliken, Mechanics of Amorphous Polymers and Polymer Nanocomposites during High Rate Deformation, 2006.

Z. X. Pan, B. Sun, V. Shim, and B. Gu, Transient heat generation and thermo-mechanical response of epoxy resin under adiabatic impact compressions, International Journal of Heat and Mass Transfer, vol.95, pp.874-889, 2016.

A. Regev and D. Rittel, Simultaneous transient temperature sensing of impacted polymers using infrared detectors and thermocouples, Experimental Mechanics, vol.48, pp.675-682, 2008.

C. Meola, S. Boccardi, N. D. Boffa, E. Monaco, G. Petrone et al., Learning more on impact damaging of composites with infrared thermography. ICILSM, 2016.

Y. Li, Z. Yang, J. Zhu, M. A. Zhang, W. Zhang et al., Investigation on the damage evolution in the impacted composite material based on active infrared thermography, NDT&E International, vol.83, pp.114-122, 2016.

A. Gilat, V. T. Kuokkala, J. D. Seidt, and J. L. Smith, Full-Field Temperature Measurement in High Strain Rate Tensile Experiment, 2016.

J. D. Seidt, V. T. Kuokkala, J. L. Smith, and A. Gilat, Synchronous Full-Field Strain and Temperature Measurement in Tensile Tests at Low, Intermediate and High Strain Rates, Experimental Mechanics, vol.57, pp.219-229, 2017.

M. A. Gagnon, F. Marcotte, P. Lagueux, V. Farley, E. Guyot et al., High-Speed and High-Definition Infrared Imaging for Material Characterization in Experimental Mechanics, Proc. of SPIE, vol.10214, 2017.

Z. Pan, J. Xiong, S. Liang, and M. Zou, Transient deformation and heat generation of solid polyurethane under impact compression, Polymer Testing, vol.61, pp.269-279, 2017.

D. Rittel, Transient Temperature Measurement Using Embedded Thermocouples, Experimental Mechanics, vol.38, issue.2, 1998.

S. C. Chou, K. D. Robertson, and J. H. Rainey, The effect of strain rate and heat developed during deformation on the stress-strain curve of plastics, Experimental Mechanics, vol.13, pp.422-432, 1973.

Y. Rabin and D. Rittel, A model for the time response of solid-embedded thermocouples, Experimental Mechanics, vol.39, pp.132-136, 1999.

D. Rittel, On the conversion of plastic work to heat during high strain rate deformation of glassy polymers, Mechanics of Materials, vol.31, pp.131-139, 1999.

M. J. Kendall, R. F. Froud, and C. R. Siviour, Novel temperature measurement method & thermodynamic investigations of amorphous polymers during high rate deformation, Polymer, vol.55, pp.2514-2522, 2014.

I. Korkut, M. Boy, I. Karacan, and U. Seker, Investigation of chip-back temperature during machining depending on cutting parameters, Materials and Design, vol.28, pp.2329-2335, 2007.

B. Shen, G. Xiao, C. Guo, S. Malkin, and A. J. Shih, Thermocouple Fixation Method for Grinding Temperature Measurement, Journal of Manufacturing Science and Engineering, vol.130, 2008.

C. Meola and G. M. Carlomagno, Impact damage in GFRP: New insights with infrared thermography, Composites: Part A, vol.41, pp.1839-1847, 2010.

M. A. Biot, Thermoelasticity and irreversible thermodynamics, Journal of Applied Physics, vol.27, pp.240-53, 1956.
URL : https://hal.archives-ouvertes.fr/hal-01368671

C. Meola and G. M. Carlomagno, Infrared thermography to evaluate impact damage in glass/epoxy with manufacturing defects, International Journal of Impact Engineering, vol.67, pp.1-11, 2014.

T. Liang, W. Ren, G. Y. Tian, M. Elradi, and Y. Gao, Low energy impact damage detection in CFRP using eddy current pulsed thermography, Composite Structures, vol.143, pp.352-361, 2016.

B. Lee, B. Walsh, S. T. Won, H. M. Patts, J. W. Song et al., Penetration failure mechanisms of armor-grade fiber composites under impact, Journal of Composite Materials, vol.35, pp.1605-1633, 2001.

B. A. Cheeseman and T. A. Bogetti, Ballistic impact into fabric and compliant composite laminates, Composite Structures, vol.61, pp.161-173, 2003.

C. Meola, G. M. Carlomagno, A. Squillace, and G. Giorleo, Non-destructive control of industrial materials by means of lock-in thermography, Meas Sci Technol, vol.13, pp.1583-90, 2002.

X. Duan, Y. Zhou, D. Jia, and D. Wang, Microstructures of ZrO2(3Y) Ceramics after Dynamic Impact, Key Engineering Materials, vol.353, pp.1533-1535, 2007.

H. Xuhui and H. Youqing, The Effects of Curing Cycles on Properties of the Epoxy System 3221/RH Glass Fabric Composites, Polymer Composites, vol.29, pp.364-371, 2008.

T. Lisle, M. L. Pastor, C. Bouvet, and P. Margueres, Damage of woven composite under translaminar cracking tests using infrared thermography, Composite Structures, vol.161, pp.275-286, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01430344

A. Comparny, Datasheet of EPOLAM 2020